Buzz
Below is a list of common Samsung washing machine errors that Mytour has researched and compiled to help you easily identify and resolve them.
1. Error 4E _ Water Supply Error
This type of error is related to unstable input water conditions, resulting in low or no water supply.
Cause:
- Insufficient water supply
- Dirty or blocked water pipes
- Malfunctioning or blocked water supply valve
- Pressure relief valve damage
- Control board circuit failure
Resolution:
- Check the indoor water source. If weak, consider installing a pressure booster pump.
- Inspect water pipes for twists and clean if necessary.
- Ensure the water conduit is securely attached to the nozzle.
- Verify if the water supply valve is open. If dirty, remove the filter mesh and clean it.
- Replace the water supply valve.
- If the control board circuit is faulty, consult a technician for repairs.
2. Error 4C _ Water Supply Issue to Washing Machine
These errors relate to problems with the water supply to the washing machine, either inadequate or weak flow.
Causes:
- Water reservoir depleted
- Water tap not unlocked
- Water supply valve clogged or obstructed
- Water conduit blocked or twisted
- Weak incoming water source
- Control circuit of water system malfunctioning
Resolution:
- Inspect the water reservoir or water supply for water availability
- Clean the water supply valve
- Clean the water conduit and untangle if twisted
- Adjust the washing machine lower than the water reservoir position
- Install an additional pressure booster pump
- Contact the warranty center or a technician for repair
3. Error 5C _ Samsung Washing Machine Cannot Drain Water
Error related to drainage pipe issues or other issues preventing water drainage during the washing cycle.
Causes:
- Drainage pipe folded or twisted
- Sediment filter clogged or obstructed
- Faulty machine circuit board
Resolution:
- Check if the drainage pipe is folded or positioned too high
- Disconnect the washing machine from power, then remove the sediment filter and clean it with a soft cloth.
- For circuit board issues, call a technician for repairs.
4. Error 5E_Drainage Pipe Issue
Samsung washing machine error code 5E or SE relates to problems with the drainage pipe.
Causes:
- Drainage pipe clogged due to sediment causing obstruction
- Drainage pipe punctured by rodents or improperly installed
Resolution:
- Regularly clean the water pipe
- Replace the drainage pipe or lower its position for easy water flow.
5. Error UE_Imbalance in Washing Drum
Error related to washing machine imbalance, causing the spin cycle to be unable to start.
Causes:
- Washing machine is uneven, not balanced with the floor
- Uneven distribution of clothes inside
Resolution:
- Add more paper or tiles under the washing machine feet to balance it.
- Reorganize clothes inside the washing machine with the following steps:
o Step 1: Turn off the machine and unplug it o Step 2: Evenly arrange clothes inside the drum o Step 3: Plug in and restart the machine
6. Error 0E, 1E_Water Overflow
Washing machine receives an excessive water supply, causing overflow and triggering an error
Causes:
- Drainage pipe twisted, folded, or blocked by debris, foreign objects
- Malfunctioning drainage pump or circuit board
- Water level sensor damaged, unable to measure actual water quantity
- Water supply valve inside the machine stuck, continuously supplying water
- Control circuit board failure
Resolution:
- Check the drainage pipe for twists, folds, or blockages and clean if necessary
- Turn off the machine and unplug it. Then, remove the filter of the drainage pump and clean using a toothbrush
- Check the functionality of the drainage pump
- Call a technician for repair and inspect the circuit board
7. Error DL_Samsung Washing Machine Door Not Securely Closed
This is the signal of the washing machine when the door is not securely closed, ensuring safety for users.
Causes:
- The washing machine door is not securely closed or not aligned properly
Resolution:
- Check for any clothes or objects causing the door to be stuck
- Verify if the washing machine lock latch is functioning normally
- Inspect the door sensor for proper functionality
8. Error L0_Washing Machine Door Not Locked
Causes:
- Door lock sensor disconnected
- Door not securely locked
Resolution:
- Check if the door is securely closed
- Review the door lock sensor for normal operation and replace if necessary
- Ensure the connection between the door sensor and control circuit is functioning
- Call a technician to inspect and repair
9. Error LE_Washing Machine Water Leakage
Causes:
- Water leakage
- The water outlet of the drainage pipe is higher than the water inlet, causing water to be unable to drain and resulting in leakage.
- Blocked drainage pipe
Resolution:
- Check if the drainage pipe is punctured, crimped, or twisted
- Inspect the filter for dirt or blockage
- If the machine still reports an error after checking, call a technician for repair
10. Error CL, dE_Child Lock Mode Activated
This is not an error but a notification from the washing machine when the Child Lock mode is activated by the user
Causes:
- Child Lock mode activated
Resolution:
- Press and hold the Temp and Rinse buttons for 3 seconds to toggle the Child Lock mode
The above provides information on 10 common Samsung washing machine error codes and quick repair methods compiled by Mytour. We hope this article has addressed your queries effectively.
