
Despite being widely used in every household, many users still misuse high-speed kettles. Check out some safety tips to use high-speed kettles safely and prevent explosions in the following article from Mytour!
1. Avoid Opening the Lid While Boiling Water
Unlike other types of kettles used on gas or electric stoves, high-speed kettles use electricity to boil water. Therefore, when the device is in operation, you should not open the lid to check the boiling status. Opening the lid while the water is boiling may cause the device to continue heating until the water evaporates completely. This can also lead to overheating and damage to the heating plate and other components.

Therefore, users should avoid this seemingly harmless habit. Wait until the water boils, and the high-speed kettle will automatically shut off, allowing you to safely open the lid.
2. Avoid Using High-Speed Kettles for Purposes Other Than Intended
High-speed kettles can boil water quickly in just a few minutes, making them a 'national' appliance found in most households today. However, many users still misuse high-speed kettles by using them for purposes other than boiling water.

Although useful and convenient, this usage is completely wrong and is the cause of reduced durability and potential electrical malfunctions.
3. Only Pour the Correct Amount of Water
Every high-speed kettle is equipped with a water level gauge to help users monitor the water level. Therefore, when using, you should check this gauge and pour the correct amount of water according to the standard. Do not pour too little water below the standard level because when the water boils, the kettle is prone to dry out, and the heating plate will overheat, causing fires and explosions.

If you pour water beyond the maximum limit, the boiling water may easily overflow. The boiling water can seep into the internal circuits, causing leaks, short circuits, and explosions.
4. Avoid Using High-Speed Kettles Without Automatic Shut-Off
All modern high-speed kettles are equipped with an auto shut-off feature when the water has boiled. However, if this feature malfunctions during use, it's dangerous to continue using the kettle. It not only increases the risk of kettle damage but also poses a danger of electrical fires and hazards to other electronic devices and household items.

The most effective way to address this is to promptly take the high-speed kettle to repair shops or warranty centers for assistance.
5. Replace your high-speed kettle when it's too old
Don't wait for your high-speed kettle to break down before replacing it. This isn't a cost-effective approach as many users believe. When you notice that your kettle is too old, replace it immediately. By this time, the kettle's durability has decreased, and its operational features are no longer optimal. It also consumes more energy and poses a higher risk of major explosions.

When replacing your high-speed kettle, make sure to choose genuine devices manufactured by reputable brands to ensure quality, durability, and safety for health. Avoid unnecessary risks of explosions, malfunctions, and, most importantly, ensure health safety as they are made from good materials. Some brands you can consider are Roler, Coex, Kangaroo, Sunhouse...

High-speed kettles are useful and familiar household appliances for today's families. Although their usage is very simple, users also need to know how to use them correctly, effectively, and safely to keep the device durable and avoid damage. We hope the usage tips shared by Mytour above will help you use this device better. Thank you for reading the article!
