Camper Leveling Guide

Ensuring your camper is properly leveled enhances comfort and ensures the smooth operation of appliances like gas refrigerators. Utilize a level and either plastic leveling blocks or wood scraps for this task. Start by leveling the camper from side to side, then adjust the tongue jack to level it from front to back. Taking the time to do this will maintain the safety and stability of your camper.

Select a Flat Parking Spot

Before you start leveling the camper, ensure the area is clear of any obstacles. Scan the surroundings for rocks, branches, or other camping paraphernalia that might obstruct your work. Once cleared, ask everyone to step back from the camper while you proceed.

Utilize a level to assess the camper's horizontal alignment. Carry a basic level, such as a bubble or surface level, for this task. Place the level horizontally across the doorway of the camper. Whichever side of the level dips lower indicates the side of the camper requiring elevation adjustment.

Position leveling blocks adjacent to the tires. These blocks, akin to sturdy plastic Lego bricks, will serve as ramps for the camper. Assemble them to form a ramp in front of the tire that necessitates lifting. You can acquire these blocks from various retailers like Walmart or specialized camper stores.

Drive the camper onto the leveling blocks cautiously. Gradually maneuver the camper forward until its wheels rest securely on the blocks. Seek assistance if required, ensuring the camper is properly aligned. Reassess the camper's levelness and make adjustments accordingly.

Secure the camper in place by placing wheel chocks beneath the tires. Wheel chocks are essential safety measures, hence their usage is imperative. Position them snugly beneath the wheels, securing them in place manually. If the terrain slopes towards the rear of the camper, position the chocks accordingly.

Position wooden blocks beneath the tongue jack. The tongue jack, located at the front of the camper and connecting to your vehicle, requires support. Stack several 2 in × 10 in (5.1 cm × 25.4 cm) wood pieces beneath it to provide a stable base. This ensures the camper remains level during usage.

Detach the camper from the vehicle. After creating a stable base for the jack, disconnect it from the vehicle's bumper. Rest the jack's metal shaft on the wooden blocks. Move your vehicle away to proceed with the leveling and stabilization process.

Determine the camper's front-to-back levelness. Place the level within the camper's doorway once more, aligning it to indicate the camper's front and back. If there's a discrepancy in height between the sides, further adjustments are necessary.

Lower the camper by adjusting the tongue jack. Refer to your owner's manual for guidance on adjusting the jack. Typically, the jack features a crank for manual adjustment of its metal shaft. Continue this process until the camper is leveled from front to back.

Position wood blocks beneath the stabilizing jacks. The stabilizing jacks, situated at the four corners of the camper, aren't intended for leveling but serve to prevent rocking and maintain stability. Place two or more 2 in × 4 in (5.1 cm × 10.2 cm) wooden blocks under each stabilizer to secure them in place.

Lower the jacks onto the wooden blocks. Refer to your owner's manual for instructions on adjusting the stabilizing jacks. Lower them until they firmly rest on the wood blocks.

• Explore lumber yards for free scrap wood suitable for leveling blocks.

• Using stabilizer jacks to bear the weight of the camper will cause permanent damage.
• Always park the camper on level ground to prevent tipping.
• Ensure leveling blocks are wider than the tires to prevent tire damage.

• A level
• Leveling blocks or 2 in × 10 in (5 cm × 25 cm) scrap wood
• Wheel chocks or wood scraps