Buzz
1. Remote still displays but no beep sound
Cause:
Typically, whenever users adjust the air conditioner control, regardless of the selected function or temperature setting, there is usually a beep sound accompanying each button press.
However, if users do not hear a beep sound from the air conditioner remote while the control screen is still displaying, the cause may be a malfunction in the infrared sensor of the remote, such as the electrical contact part of the sensor being blackened or covered by dust.
Resolution:
Use a dry cloth to wipe the sensor clean to remove any clinging dust. If you still don't hear the beep, contact the refrigeration technical department for quick and timely assistance.
2. Remote loses screen
Cause:
The remote's display screen allows users to easily see the temperature or function being adjusted.
However, if you no longer see the display screen on the remote, it could be due to corrosion on the battery terminals. Poor contact of the battery end part causes the connection path of the battery and the remote circuit board to be lost.
Solution
The solution is quite simple. First, remove the old battery from the remote and scrape off any corrosion remaining on the part that contacts the battery. Finally, insert a new battery to use as usual.
3. Remote does not display temperature
Cause:
The cause leading to this condition is similar to the above error, where the battery is corroded, damaging the remote circuit board and causing the battery connection path to be lost.
Solution
Remove the remote control battery and check its condition. If the old battery is corroded, replace it with a new one.
4. Remote screen flickers
Cause:
This error occurs due to the remote being pressed or dropped, causing the remote control circuit to become loose. Loose joints or peeling of the remote can lead to a flickering control screen. Additionally, weak batteries are also one of the reasons for the remote screen flickering when displaying.
Solution:
If the cause is due to weak remote batteries, replace them with new ones to resolve the issue.
If the cause is due to the remote being pressed or dropped: Contact the technical support team to diagnose and address the issue promptly.
5. Remote unable to connect with air conditioner
Cause:
The malfunction of the air conditioner's board affects the signal transmission from the air conditioner to the remote, resulting in the remote not connecting to the air conditioner.
Solution:
Contact the technical staff or warranty service centers for inspection and repair.
Above are the causes and solutions to some common air conditioner remote errors that you need to grasp. Remember to save for reference and application. Don't forget to follow Mytour for quick updates on the most useful information.
