Buzz
Electrical appliances often encounter various glitches during operation, and washing machines are no exception. Whether due to objective or subjective reasons, your washing machine can still become abnormal, and you need to quickly address it...
1. Common Issues Faced by Washing Machines and How to Resolve Them
Electrical appliances, including washing machines, often experience numerous errors during operation. Identifying the root causes, whether external or internal, is crucial for prompt resolution. Explore the common problems with washing machines and effective troubleshooting in this article to simplify your family life!
1. Washing Machine Experiencing Strong Vibrations
- The cause: If the washing machine is vibrating strongly, it may be due to misalignment, and the four corners of the appliance are not properly balanced.
Adjust the machine's position to ensure stability, firmness, and a sense of safety during operation.
The washing machine vibrates intensely during operation
The washing machine makes a loud noise
Reason: Clothes in the washing drum are twisted or there is a foreign object in the machine that fell out from the clothes pocket, causing the washing machine to make a loud noise during operation.
Solution: Quickly turn off the machine, check the clothes, and carefully untangle any clothing snags.
It is necessary to turn off the machine immediately upon hearing unusual sounds from the washing machine
Water does not flow out of the drainage pipe even after the overflow mode
Reason: Users do not follow the usage instructions, and the water level and pressure are lower than normal.
Solution: Adjust the water level and pressure to meet the standard water supply rate of 15 liters per minute.
The machine does not turn off even after the washing process is complete
Reason: The machine's power switch is stuck.
Solution: In this situation, you can only contact the repair center immediately as this is a high-level leakage issue.
5. Drainage time for washing water is excessively long
Reason: It could be due to a clogged or incorrectly connected and deformed drainage pipe caused by external factors.
Solution: Turn off the washing machine and carefully check the drainage pipe.
Check the drainage pipe immediately for timely repairs
6. Water does not flow into the drum during washing and spinning
Reason: You have overlooked a certain stage.
Solution: Immediately check the water supply, whether the water supply hose is open, and finally, inspect the metal mesh inside the water inlet pipe to see if it is blocked.
7. Washing machine does not clean clothes
Reason: This is a common issue; clothes not being cleaned may be due to overloading, leading to an imbalance between water and clothes. Also, inadequate cleanliness of the washing drum can affect the machine's ability to clean clothes.
Solution: Clean the washing drum thoroughly, adjust, and observe more carefully. Use an appropriate amount of clothes for optimal cleaning.
Thoroughly clean the washing machine and washing drum
8. Clothes still have tiny detergent particles clinging to them
Reason: Too much detergent is used, leaving excess residue on clothes, or the water temperature is too low.
Solution: Use the appropriate amount of detergent, and the water temperature should be below 40°C for the detergent to dissolve completely.
9. Weak water pumping process in the washing machine
Reason: Many households have the habit of dividing the water pipe into multiple branches, causing low water pressure.
Solution: Place the washing machine in an area with higher water pressure or use an additional booster pump for faster operation.
10. Washing machine continuously drains water without stopping
Reason: The washing machine's drain valve is stuck due to foreign objects entering with the clothes.
Solution: If the washing machine only leaks slightly, use it with confidence; after some time, foreign objects will automatically flow out with the water. However, for severe leaks, contact a professional for timely repairs.
Call the repair service immediately for significant leaks
11. Washing machine suddenly provides water in the middle of the washing or draining process
Reason: Additional clothes are added while the washing machine is in operation, or the water level provided to the washing machine is insufficient.
Solution: This situation is not too concerning; next time before washing, gather all the clothes to be washed at once and be a bit more thoughtful.
