Buzz
As one of the ever-popular models in the market, the Kangaroo KG726 fan always gains the trust of users. However, like any other product, the Kangaroo KG726 stand fan may encounter some issues during usage. Therefore, in this article, Mytour will point out the common problems with this model, as well as corresponding solutions for users' reference.
Kangaroo KG726 Fan Not Operating Despite Power On
Cause: This issue could be due to loose plugs, inadequate power supply, or a malfunctioning switch on the fan.
Solution: Firstly, check the power system, control valve, and fuses to ensure they are properly connected and functioning. Additionally, verify if the fan's voltage matches the power source. After identifying the cause, if knowledgeable about electrical systems, you can attempt home repairs; otherwise, seek professional assistance.
Fixing Kangaroo KG726 Electric Fan Shaft Binding
Cause: During operation, worn bearings may cause the rotor to skew and touch the stator.
Solution: Users can remove the cover to inspect, clean the fan thoroughly, and apply some lubricating oil to the bearing shaft. Then, gently rotate the motor shaft by hand to check for smooth and stable operation. If not, replacing the bearings is necessary. For this, contact a professional repairer or take it to a shop for replacement.
Kangaroo KG726 Stand Fan Rotates Slowly, Weakly
Cause: Prolonged operation may cause dust accumulation in the fan's parts or dryness in the oil.
Solution: Try manually rotating the fan blades to check for any obstructions. If necessary, clean the screw shaft and check the bearings for replacement if damaged or apply additional oil if dry. If the fan still rotates slowly, use a multimeter to check the resistance in the motor and power cord. If there's a significant difference, replacing the capacitor is required, which should be done by an experienced individual.
Malfunctioning Buttons or Speed Control Switch of Fan
Cause: Excessive friction during usage may corrode the metal parts responsible for electrical conduction, or prolonged use of the Kangaroo KG726 stand fan may lead to rust and dirt accumulation, hindering electrical contact.
Solution: Users can use specialized lubricating oil to spray directly into the button grooves on the fan body to remove dirt, then press the buttons multiple times until they operate smoothly. In cases where the metal parts responsible for electrical conduction are corroded, replacing the buttons is necessary.
Fixing Loud Noise from Kangaroo KG726 Stand Fan
This is a common issue when using electric fans in general, and specifically with the Kangaroo KG726 fan. The cause may be continuous operation of the fan for extended hours, causing the motor system to dry out and increase friction, resulting in noise.
Solution: For this issue, users should operate the fan at a moderate level, regularly clean the fan, check the motor, and use lubricating oil to ensure smooth and normal fan operation.
In general, when using electric fans, and particularly the Kangaroo KG726 stand fan, encountering these basic issues is inevitable. Therefore, it's important for users to thoroughly understand the causes of each issue to implement appropriate solutions.
