
Common Mistakes in Air Conditioner Usage That Lead to Energy Waste and Impact Product Durability
1. Excessive Dependence on Air Conditioning
It's undeniable that buying an air conditioner for use is essential, but some users tend to excessively rely on this device. Continuous use of the air conditioner for extended periods leads to significant energy waste and negatively affects your health.

Excessive Reliance on Air Conditioning
We should only use this device during specific hours of the day, such as naptime or at night, to optimize energy consumption and increase the lifespan of the equipment. Note that continuous on-off cycles can cause damage to the internal motor.
2. Running the Air Conditioner When Unoccupied
To avoid wasting electricity, it's advisable to turn off the air conditioner when not in use, allowing the machine to take a break.

Limiting Air Conditioner Usage When Unoccupied
Some users often believe that leaving the air conditioner running will instantly provide a cool atmosphere upon entering the room. However, modern air conditioners are equipped with rapid cooling features, making this practice entirely unnecessary.
3. Setting the Operating Temperature Too Low
According to research data from air conditioner manufacturers, reducing the temperature by 5 degrees Celsius can increase energy consumption by an additional 40% compared to normal settings. Therefore, users should consider adjusting the temperature to the most reasonable level, typically keeping the machine operating between 23 to 28 degrees Celsius.

It's Suitable to Set the Operating Temperature Between 23 and 28 Degrees Celsius
Another reason not to set the temperature too low is the significant temperature difference between the room and the outside, which can adversely affect your health.
4. Neglecting Air Filter Maintenance
Usually, after one month of use, it's advisable to remove the air filter from the air conditioner for cleaning. This task is quite simple, and you can easily do it at home without needing to call a technician.

Regularly Clean the Air Filter
Cleaning this filter not only ensures a fresher and cooler airflow inside the room but also enhances the efficiency of the machine, saving energy consumption.
5. Neglecting Regular Equipment Inspection and Maintenance
Regularly inspecting and maintaining the equipment is a crucial task. Technicians can accurately assess the condition of your product, allowing them to provide the most effective solutions and prevent regrettable damages in the future.
6. Room Without Curtains
Installing curtains or blinds helps significantly reduce direct sunlight entering the room, making the atmosphere inside cooler and relieving stress on your equipment.

Consider installing curtains at door positions to reduce heat from direct sunlight
7. Air Conditioner Installed Too Close to a Heat Source
Installation plays a crucial role in determining both the power consumption and product durability.

Avoid installing the air conditioner too close to heat sources
Installing in high-temperature areas like near the refrigerator, microwave, or stove can cause the machine to operate at higher capacity, leading to increased power consumption and reduced durability of internal components.
Above are the causes and solutions to make the use of your home air conditioner more efficient, simultaneously enhancing durability and lifespan for the product.
Huu Phuoc
Mytour
