Buzz
Bathroom heater lamps are essential appliances during chilly days. However, are you aware of the common mistakes people make while using them? Read on to discover how to use these lamps properly and safeguard your health.
1. Exposing the Heater Lamp to Water
Experts warn that bathrooms, being humid environments, can pose electrical hazards if exposed wires come into contact with water or suffer rodent damage. This poses a significant risk to users' safety and well-being. Therefore, it's crucial to avoid exposing heater lamps to water.
Trên thị trường hiện nay, đa phần các sản phẩm đèn sưởi được thiết kế chống nước nhưng bạn nên tránh để đèn tiếp xúc với nước bởi có thể sẽ khiến khả năng tỏa nhiệt của bóng đèn bị giảm. Điều này sẽ khiến thiết bị sưởi được bền hơn, kéo dài được tuổi thọ sử dụng.
2. Dùng đèn sưởi khiến da khô
In the cold winter days, using a heater lamp can boost your health and ward off colds. However, it can also exacerbate dry skin due to infrared rays.
To protect your skin, limit heater lamp usage to 45 minutes per session and then turn it off. Use lukewarm water for bathing to maintain proper moisture levels. Depending on room conditions, adjust the lamp brightness accordingly; it doesn't need to be fully on, just enough to provide warmth. Applying moisturizer after each shower can prevent dry skin.
3. Avoid Prolonged Use of Heater Lamps
Many severe burn cases are caused by prolonged use of heater lamps. These lamps carry a high risk of fire hazard. Especially when placed in damp bathrooms, water droplets can cause explosions.
To mitigate this risk, refrain from continuous use of heater lamps. Always remember to turn off the lamp after use.
4. Neglecting Regular Inspection and Cleaning of Heater Lamps
Regular inspection and maintenance of heater lamps are essential measures to ensure safe usage.
Periodically check the heater lamp's wires for any signs of damage. If damaged, call for repair or replace the wires immediately.
Clean the heater lamp at least twice a year, before the winter season begins and after it ends. Make sure to remove all dust from the bulbs to prolong their lifespan.
5. Installing Heater Lamps Too Low
Heater lamps emitting infrared radiation pose a high fire risk. Placing these devices too close to the bathing area increases the risk of lamp failure. Hence, carefully consider the placement of heater lamps.
Consider placing the heater lamp 1 to 2 meters away from the bathing area. The exact positioning will depend on expansion screws and mounting bars provided. Ensure that the lamp's light can reach your body while bathing. Thoroughly research and choose a lamp suitable for your bathroom size. Install lamp guards and inspect wires diligently to prevent leaks or short circuits.
Here are 5 mistakes to avoid when using bathroom heaters for safe usage and to prevent dangerous fires. Save this for reference. Don't forget to follow Media Mart for quick updates on the most useful information.
Explore the top-selling bathroom heater models at Media Mart.
