Buzz
1. Overloading leads to strain
When you notice the washing drum spinning weakly, you might immediately think it's because you've overloaded it with too many clothes, causing the machine to strain. Each washing machine model has a specific weight limit, so you should only wash a suitable amount. If you have a large load, it's better to divide it and wash multiple times. Additionally, avoid washing large thick blankets as they can get stuck, causing the machine to spin weakly or even break down.
2. Dirty mesh filter causing blockage
The mesh filter is a part that helps the washing machine filter out debris, paper, fabric lint, etc., during the washing process, preventing them from clogging and damaging the machine. However, this part is often neglected by users and not cleaned regularly. Over time, the washing drum will quickly accumulate a thick layer of residue, especially in the drain holes, preventing water from flowing into the drum or causing slow drainage.
The most effective solution is to regularly clean the mesh filter and washing drum to ensure optimal performance.
3. Weak water supply affecting washing machine performance
Insufficient water supply to the washing machine is also a cause for its weak spinning or failure to execute washing programs. Therefore, you need to check the water supply and ensure proper installation of the washing machine to improve water pump operation. Consider installing a booster pump to enhance water flow if necessary.
4. Damaged Drive Belt Causing Weak Spinning
A worn-out drive belt is also a common reason for the washing machine not spinning or spinning weakly.
The simplest solution is to check and replace the drive belt to restore normal washing machine operation. However, if you lack the expertise in washing machine repair, it's best to contact a technician or service center for a prompt drive belt replacement.
5. Washing Machine Circuit Board Malfunction
The circuit board serves as the control center for all washing machine operations. If the circuit board malfunctions, the washing programs will be interrupted. Sometimes, the circuit board only sends signals to the water inlet but not to the spinning drum.
Solution: Contact a washing machine repair technician or service center to have them check the condition of the circuit board and rerun the program if necessary.
Above are the summarized 5 main causes and effective solutions for weak spinning washing machines that users often encounter. Hopefully, these insights will assist users in their usage. Don't forget to stay updated on the latest technology news and useful tips regularly updated on Mytour's news website!
