Sharp air conditioners are a brand originating from Japan. Products from Japan are highly regarded for their quality, durability, efficiency, and safety. Sharp air conditioner products are no exception. However, no matter how durable and good they are, the process of using Sharp air conditioners is still prone to malfunctions. The most common are the 5 issues below, let's explore each issue to understand the causes and solutions.
1. Sharp air conditioner won't start
If your Sharp air conditioner is working normally but cannot start the next day, you may immediately think of the following reasons:
+ Power outage or electrical issues.
+ Loose socket.
+ Wiring or socket malfunction.
+ Air conditioner fuse blown.
Corresponding to these causes are the following remedies:
+ Tighten the socket connection.
+ Replace wiring and socket.
+ Contact the manufacturer's warranty center or repair technician.

2. Sharp air conditioner blows excessively cold air
For the issue of Sharp air conditioner blowing excessively cold air, the reasons may come from the following:
+ The controller is damaged and cannot adjust the temperature.
+ Lowering the temperature too much compared to the demand.
Corresponding to the 2 reasons mentioned above, there will be 2 remedies as follows:
+ Check the remote control of the Sharp air conditioner, if the control is out of battery replace the battery; if the control is damaged, replace it with a new one.
+ Adjust the temperature of the machine to the appropriate level. If it's still too cold, call an air conditioner repair technician.

3. No cold air despite being in cool mode
No cold air despite being in cool mode and set at low temperature is also a common issue when you use a Sharp air conditioner. The cause of this error may be:
+ Room temperature lower than the temperature emitted by the machine.
+ The evaporator/air transfer unit of the indoor unit is frozen.
This is a common issue and nothing to worry about, you can rest assured. You don't need to do anything, just let the air conditioner melt all the ice inside the air ducts and it will resume normal operation.

4. Air conditioner runs, then stops, and runs again on its own
There are 2 main reasons why the Sharp air conditioner runs and then stops, and runs again, including:
+ The air conditioner is overloaded, so it shuts off automatically to ensure safety.
+ Low voltage supply is insufficient for the air conditioner to operate.
To fix this issue, follow the instructions below:
+ If the air conditioner is running overloaded, turn it off to let it rest before using it again.
+ Check the voltage to see if it's stable, if not, use another transformer or repair it to stabilize the current flow.

5. Air conditioner in DRY mode but no cold air comes out
The reason the air conditioner in DRY mode doesn't blow cold air is because the evaporator/air transfer unit is frozen. Please wait for the defrosting process to complete, and the machine will resume operation.

When you encounter any of the aforementioned errors with the Sharp air conditioner, you need to stop using the machine immediately and follow the instructions for inspection. For simple errors, you can attempt to repair them yourself, but for serious errors, you should contact the warranty center or professional repairmen for the best support.
