Buzz
As mentioned earlier, iPhone data restoration can only be done through iPhone Restore operations. However, during the process of restoring iPhone 6, 6 Plus data, we cannot avoid encountering various errors. Therefore, this article compiling iPhone 6, 6 Plus error codes during restoration will help you understand this better.
Compilation of iPhone 6, 6 Plus Error Codes during Restoration
Here is a list compiling various error codes encountered during the restoration of iPhone 6, 6 Plus devices:
1. Error Code -1
Encountering error code -1 during the restoration of your iPhone 6 or 6 Plus often indicates a hiccup in the connection with Apple's server (during baseband update), leading to the frustrating apple logo freeze.
To tackle this issue, you'll need to download the TinyUmbrella tool from here: Download TinyUmbrella.
Next, utilize this tool to exit Recovery Mode on your iPhone.
2. Error codes -50, -35
Error codes -50, -35 occurring during the restoration of iPhone 6 or 6 Plus typically stem from issues with the iTunes tool on your computer, causing instability in functionality.
You'll need to take steps to completely uninstall iTunes from your computer, then download the latest version of iTunes onto your device from here: Download iTunes.
3. Error code -98xx
To troubleshoot error code -98xx during the restoration of iPhone 6 or 6 Plus, you'll need to uninstall iTunes and restart your computer, then proceed to install the latest version of iTunes for your device.
4. Error codes 1 and 6
The root cause of error codes 1 and 6 during the restoration of iPhone 6 or 6 Plus lies in the connection process between your iPhone and the computer, which may have encountered issues, possibly stemming from the connecting cable. You can try connecting to a different USB port as well as replacing the original iPhone cable.
5. Error code 9
When error code 9 appears during the restoration of iPhone 6 or 6 Plus, it indicates that your device does not have sufficient battery power to complete the data restoration process. Therefore, make sure to fully charge your device before retrying the iPhone restoration process.
6. Error codes 10, 1300
With these two error codes 10 and 1300, it suggests that the current version of iTunes you're using does not support, it's lower than the iOS Firmware version that iPhone 6, 6 Plus is using to perform iPhone Restore.
7. Error codes 13, 14
These errors occur when you mistakenly attempt to Restore iPhone with a Firmware version not supported on your device, so you need to download the correct Firmware version for your device, or directly download it from iTunes.
8. Error codes 19, 2001, 2006
Please check your USB connection port and the connecting cable of your iPhone device for any looseness, as this is the cause of iPhone 6, 6 Plus errors during Restore.
9. Error code 20
This error originates from the hardware of the device, so when you encounter error code 20 on iPhone 6 or 6 Plus during iPhone Restore, take it to iPhone warranty centers for assistance.
10. Error code 21
This error occurs when you improperly handle your iPhone 6 or 6 Plus before performing iPhone Restore. Refer to the guide on entering DFU mode on iPhone to address this issue.
11. Error code 23
You need to ensure that your iPhone 6 or 6 Plus has at least 3GB of available internal memory to safely perform iPhone Restore.
12. Error code 29
The likely cause of this error is a FlashBaseband malfunction on the device, so take the device to warranty centers for timely assistance.
13. Error code 34
Similar to Error code 9 mentioned above, ensure that your iPhone device is fully charged before attempting again.
14. Error codes 1002 and 14xx
These are common errors encountered with Jailbroken iPhone 6 or 6 Plus devices, so you'll need to use the TinyUmbrella tool to utilize the Fix Recovery Mode feature.
15. Error code 1600
You've selected the wrong mode, for this iPhone 6, 6 Plus error during Restore, you need to put the device into Recovery Mode instead of DFU Mode.
To learn how to put your iPhone into Recovery Mode, you can refer to the guide on putting iPhone into Recovery Mode.
16. Error code 1601
You need to restart your iPhone once and then proceed with the Restore iPhone steps to resolve this 1601 error.
17. Error code 1604
If you're using a Custom iPhone Firmware to perform device Restore, you need to Jailbreak iPhone 6, 6 Plus to utilize this iPhone Firmware Restore feature.
18. Error code 1619
You need to update the latest version of iTunes on your computer.
19. Error codes 2003, 2002, 3004, 3014
There was an Internet connection issue on the computer while performing iPhone 6, 6 Plus Restore. You need to ensure this network connection process to resolve.
20. Error code 3191
The reason for this iPhone 6, 6 Plus error during Restore is the Quicktime tool on the computer encountering issues that need to be resolved.
Right-click on QuickTimePlayer, select Properties, then navigate to the Compatibility mode tab, uncheck Run this program in compatibility mode, press apply and done to confirm.
21. Error code 11222
If you're using Jailbreak versions iOS 9.3.3 or iOS 10.2, you need to Reset your device to disable Jailbreak and remove Tweaks, apps from Cydia to fix this error code.
https://Mytour.vn/tong-hop-ma-loi-iphone-6-6-plus-khi-restore-19358n.aspx
So we've just explored the compiled list of iPhone 6, 6 Plus error codes during Restore that you may encounter while using your device and performing data restoration tricks, hopefully this article will be helpful in your iPhone usage journey.
