Buzz
Common SANYO errors fall into two groups: those fixable at home and those requiring professional software-related assistance.
In this piece, Mytour offers a complete guide to prevalent SANYO washing machine errors, their origins, and effective remedies.
1. Which country manufactures SANYO washing machines?
SANYO washing machines belong to the renowned Japanese conglomerate. A standout series from the brand is the AQUA SANYO washing machine.
However, by 2008, some small sectors of the Sanyo brand were acquired by a Chinese conglomerate, including the AQUA washing machine brand. Therefore, the AQUA brand is currently owned by China and developed based on Japanese technology.
SANYO brand washing machines boast stylish designs, affordable prices, catering to the majority of consumer needs and purchasing abilities.
2. Common SANYO washing machine error codes and DIY troubleshooting
Below are some commonly encountered errors on SANYO washing machines and ways to troubleshoot them at home:
2.1. Error Code E1: Issues with water inlet
Error Code E1 often appears when there are problems with the unstable water source or the water supply valve is not open.
Solution: To address this issue, you can check if the incoming water source is stable, clean the water inlet valve filter, inspect water pipes to ensure there are no blockages, and verify that the water pressure meets the requirements.
2.2 Error Code E2: Water not draining
Error Code E2 is often associated with issues related to the drain valve.
Solution: Examine the drain water pipe for any obstructions, and inspect the circuit board system for potential malfunctions.
2.3 Error Code E3: Lid error
This error usually occurs when the washing machine door is not securely closed or there is an issue with the door lock.
To troubleshoot, disable the child lock feature and unplug, then plug back in. If the error persists, it may be due to a faulty safety switch.
2.6 Error Code RA – UA: Issue with the water level sensor float
Error Code RA – UA may occur due to a misalignment or damage in the water level sensor float inside the machine.
To resolve, check the float and ensure the signal from the circuit is properly connected to the float.
2.7 Error Code U3: Machine imbalance, improper clothes arrangement
Error U3 is often caused by an unlevel machine placement or unevenly arranged clothes in the washing drum.
To troubleshoot, inspect the machine and its legs, reposition the washing machine to balance with the floor. Redistribute clothes evenly within the washing drum.
2.8 Error Code U4-UC: Machine lid open, circuit board damaged
Resulting from the machine lid not being securely closed, sealed, or damage to the circuit board pathways.
To resolve, check the washing machine door for jams or proper closure. Additionally, if thorough inspection reveals no jam, it might be due to a malfunction in the door switch signal to the system.
2.9 Error U5: Machine lid open in child lock mode
Error occurs when the machine lid is not completely closed when activating the child lock mode.
To troubleshoot, securely close the machine lid or activate the child lock feature.
2.10 UE Error: Failure to load
The UE error code may result from a malfunctioning motor or a snapped Drive Belt.
Solution: Check the load to see if it exceeds the permitted limit. If not, there may be internal component damage, in which case, it's advisable to call a technician for inspection.
2.12 EA Error: Water Level Sensor
The EA error code often stems from the washing machine's water level sensor malfunctioning or issues with the electrical wiring, faulty float, or damaged circuit board.
To resolve, check the wiring connection from the float to the control panel. Review the float pressure status and replace if necessary. If the issue persists, call a technician to inspect the circuit board.
3. Which cases of SANYO washing machine error codes require professional repair services
Below is a list of more severe errors that require professional inspection and resolution. – EA Error: Faulty water level sensor – ED Error: IC malfunction (common in Inverter washing machines) – EC Error: Motor malfunction – E4-20 Error: Electrical transmission issues or weak power, faulty connections – E9-04 Error: Machine circuit board malfunction – E9-20 Error: Inverter motor failure (common in Inverter washing machines) – Error Code E9-20: Errors related to the Inverter motor, possibly due to damp plugs, faulty circuit boards, or damaged motors.
Above are common SANYO washing machine error codes compiled by Mytour. Classifying error codes into groups that can be fixed at home or require professional intervention, as mentioned above, helps consumers easily understand the situation and resolve issues quickly.
