Buzz
Installing Seebaby strollers for first-timers may not be simple, but it's not overly difficult either. In this article, I'll guide you in detail on how to assemble the Seebaby S02-1 stroller.
Before purchasing the Seebaby S02-1 stroller set, open the box to find the following components: stroller frame, 2 front wheels, 2 rear wheels, stroller canopy, and an instruction manual in Hong Kongese. If you're familiar with Hong Kongese, consulting the manual will simplify the assembly. For those who don't understand Hong Kongese, follow these 3 steps.
Step 1: Assemble the Seebaby S02-1 Stroller Frame
Start by elevating the Seebaby stroller frame and expanding it. Pay attention to the back where you'll find 2 white plastic pins. When opening the frame, press them down. When not in use, fold the stroller by clicking these white pins. The black pins adjust your baby's posture—press lightly to recline and pull up for a sitting or standing position.
Step 2: Install Seebaby S02-1 Stroller Wheels
Start by installing the 2 front wheels with the arrow pointing upwards. Adjust and fit them perpendicular to the stroller frame. To remove the front wheels, gently squeeze the moon-colored plastic pin.
Next, proceed to install the 2 rear wheels. Take note of the white pin—it's responsible for keeping the stroller stationary or in motion. To stop, touch your foot to the white plastic pin to halt or continue moving. That's how you install the rear wheels.
Step 3: Install the Canopy of Seebaby S02-1 Stroller
Pay attention—on the Seebaby S02-1 stroller canopy, there are two plastic cores on each side. Attach them to the frame's arms. Behind the Seebaby S02-1 canopy, there are two loops; attach them to the back of the stroller. That's it! You've completed the installation of the stroller canopy.
With just these 3 simple steps, you can assemble your Seebaby S02-1 stroller yourself. If you don't want to bring home a pre-assembled stroller from the store due to its bulkiness, you can bring the manufacturer's box home and follow the basic 3 steps mentioned above. You might also find the guide on assembling the Seebaby To4 stroller interesting.
