Buzz
Learn how to activate DHCP on your router with this guide.
Follow these steps:
Locate the Router's IP Address
For Windows Users
Ensure your computer is connected to the Internet. Without Internet access, you cannot access your router's address. If you're experiencing Wi-Fi issues, try connecting your computer directly to the router using an Ethernet cable.
Click on 'View your network properties'. This option is usually located near the bottom of the page and may require scrolling to find.
Locate the 'Default gateway' number. This number represents your router's address, which you'll need to access its settings and modify DHCP configurations.
For Mac Users
Ensure your computer is connected to the Internet before proceeding. Without an active Internet connection, you won't be able to locate your router's address. If you encounter issues with wireless connectivity, consider connecting your computer directly to the router using an Ethernet cable.
Open 'System Preferences' from the Apple menu.
Navigate to the 'Network' icon in System Preferences.
Select 'Advanced' in the Network settings.
Click on the 'TCP/IP' tab within Advanced options.
Locate the 'Router:' field to find the router's IP address.
Activate DHCP
Navigate to your router's interface by typing its address into a web browser.
If required, log into your router. Check the manual for default credentials, or reset the router if you've forgotten your custom password.
Access the router's configuration settings.
Locate the DHCP settings, typically found under 'Network Settings', 'Advanced', 'Setup', or 'Local Network'.
Activate DHCP by toggling the 'Enable' feature. This might require you to switch from 'Disabled' to 'Enabled' in some settings. Note: Adjusting the allowable device connections may lead to connectivity issues if set too low.
Confirm your adjustments by hitting 'Save' or 'Apply.' A router reboot might be necessary to apply the changes.
Guidance
For optimal results, consult the manual specific to your router, as setup processes vary widely.
Cautions
Ensure you can physically access your network device for potential factory resets. Never enable DHCP on an unsecured network (without a password).
