Buzz
Typically, attaching a device to a computer is a process that requires users to be proficient and have a certain understanding of the device. However, connecting a SATA port is not too difficult a task; we can completely do it at home with sequential steps.
How to Connect a SATA Port for Desktop Hard Drive
Identify the hard drive bay to be installed
The bay is usually perpendicular to the bottom of the case, while the hard drive is installed in the bay is usually placed parallel to the bottom of the case. Find a suitable and snug space to install the new hard drive.
Install the hard drive into the bay
Ensure the hard drive is securely installed in the bay with 4 screws on either side or the bottom of the drive. In many cases, especially for DIY computer cases, sliding trays are used that do not require screws but still hold the hard drive securely in place using locking clips.
Prepare the hard drive for use. Finally, access the system BIOS. Next, access the System Settings to observe if the hard drive has been successfully connected. If you see the drive name, it means the hard drive has been successfully connected.
Thus, Mytour has just introduced you to how to connect the SATA port for desktop computers. In fact, you just need to pay attention to plug the cable corresponding to the position of the motherboard power board. The first time may bring you a lot of confusion, however, from the subsequent times, you will know the sequence of steps to be taken. We also guide how to fix Windows not recognizing external hard drive. If interested, please visit us for reference.
