Buzz
For those uninterested in delving deep into network cables, the crimping process may seem irrelevant. However, for system administrators, proper network cable crimping is crucial. Incorrect crimping can lead to issues like frequent lag, freezing machines, or even IP conflicts within the system.
If you're an IT system employee, this is a mandatory skill. However, it doesn't mean those unrelated to network systems don't need to know. It's a standard that helps optimize network speed through proper cable crimping. Right now, Mytour will guide you on the most accurate way to connect two switches through network cable crimping.
Connecting Two Switches with Network Cable
Step 1: Before crimping the network cable to connect two switches, ensure you have all the necessary tools, including network cable crimping pliers, cable stripping knife, RJ network crimping beads (common type), and a 100m cable with 4 pairs of 8 fibers.
Step 2: Use the knife to cut off the outer layer of the network cable.
Step 3: As soon as you separate them, you'll have 8 wires divided into 4 pairs. Now, proceed to untwist them.
Step 4: If the network system connects few machines, or simply one or two computers, just separate them into pairs.
Step 5: However, for a company system with multiple switches, follow the T658B standard, a crossover cable type.
- Refer to the T568B type below and change the colors to match the positions as shown in the image below.
Step 6: Cut to tidy up after adjusting the wires to the correct standard.
Step 7: Insert the wire ends slowly into the RJ 45 network bead and use pliers to crimp the network, securing the wires into the network bead.
Step 8: Now we've completed crimping the network cable to connect two switches. Your connection will be seamless, encountering no issues during usage.
Here are all the steps to crimp a network cable to connect two switches or more. Following this guide allows you to crimp a network cable without the need to purchase pre-made cables or rely on technicians at double or triple the usual cost. Additionally, you can explore how to fix wifi authentication issues when connecting via network cable, as well as when switching to wifi. Wifi authentication issues often occur in places with multiple computers sharing the same network line.
If you have any questions during the process of crimping a network cable to connect two switches, readers can send their queries to Mytour right here. We will respond to you as soon as possible.
Additionally, if you're encountering difficulties crimping the standard 4-pair network cable without successfully connecting to the internet, you can refer to the method of crimping the standard 4-pair network cable introduced by Mytour for better results.
