Buzz
Suddenly one day, your family's washing machine starts leaking water, flooding the floor and increasing your water bill. This poses a fire hazard and needs immediate attention. But why does a washing machine leak, and how should you handle this situation? Check out this article for quick solutions.
1. Dealing with a leaking washing machine
Suddenly one day, your washing machine starts leaking water, flooding the floor and increasing your water bill. This poses a fire hazard and needs immediate attention. But why does a washing machine leak, and how should you handle this situation? Check out this article for quick solutions.
What are the main causes of a leaking washing machine?
To identify the main causes of washing machine leaks, you need to pinpoint where the water is leaking from. Run a washing cycle to determine the specific location. Thoroughly inspect to find out what's causing the leak.
Common areas where washing machines often leak?
Leakage underneath the washing machine: It may be caused by a faulty water pump or leaking pipes inside the machine.
Leakage at the back of the washing machine: It may result from loose or damaged water supply lines.
Water leakage at the front of the washing machine: It may be due to clogged pipes or loose connections.
Uneven installation of the washing machine: Placing the machine on an uneven surface can lead to water spilling out.
Kinked hoses on the washing machine: Hoses on the washing machine may become kinked or obstructed by another object, leading to water leakage outside.
Forgetting to remove the cap from the connector: When installing a new washing machine, the installer may forget to remove the cap from the connector.
Fixing the issue of water leakage in washing machines
Once you identify the cause of washing machine water leakage, you'll have the best solution to prevent this issue. To resolve the problem of water leakage in washing machines, let's follow these steps:
Step 1: Turn off the power to the washing machine. Disconnect the power supply before performing any actions on the washing machine to avoid unfortunate incidents.
Step 2: Check and repair water supply lines
Commonly, water leakage in washing machines is caused by old, rusted, or damaged water supply lines, leading to leakage at the back of the washing machine.
How to handle:
Turn off the water valve or shut off the main water supply to the washing machine.
Use pliers to disconnect the water supply hoses.
Inspect the hoses, if they are too old or corroded, replace them with new ones.
If the hoses are still in good condition, replace the washers, worn washers can cause poor contact between the two hoses resulting in water dripping.
Ensure all connections are tight and secure before using the washing machine again.
Step 3: Inspect and repair the internal hoses of the washing machine.
Usually, after some time of use, the internal hoses of the washing machine can become damaged due to the corrosive effects of detergent, leading to leaks. You need to replace them over time to fix the issue of water leakage in the washing machine. To check the internal hoses of the washing machine, you'll need to open the washing machine lid or rear control panel, and remove the hoses by unscrewing the bolts.
How to handle:
Look for old, corroded, or split hoses and clamp rusted hoses.
To remove a hose, use pliers to disconnect the hose connections, then remove it.
Replace the old hose and connect the new hose to the fittings.
Step 3: Inspect and repair the water supply motor.
The water supply motor helps transfer water from the outside to the inside of the washing tub, and since they are immersed inside, they are susceptible to corrosion over time, leading to leaks.
How to handle:
Remove the rear cover of the washing machine.
Loosen the bolts securing the motor.
Disconnect the motor from the hoses and remove it from the washing machine. Replace the motor with a new one by reversing the process.
Other handling procedures:
The connection between water hoses is loose and does not align properly: You can tighten this connection by wrapping rubber around the joint with the drain hose.
If the washing machine is not balanced during operation, it can cause water to overflow: You should readjust the machine to be balanced using wooden blocks, plastic, or foam pieces.
When installing a new washing machine, the installer may forget to remove the cap at the connector: You should remove these caps before washing.
The connection between internal hoses in the washing machine is kinked: You should straighten the hoses.
Using inappropriate laundry detergent will produce a considerable amount of foam, which can cause your washing machine to leak: You should choose detergent suitable for your type of washing machine. (See more: How to choose good laundry detergent for washing machines).
Above are some experiences to help you fix water leaks in your washing machine. If your washing machine is heavily leaking and you cannot handle it properly, please contact the manufacturer's warranty center for the best support.
