Buzz
There are various scenarios where your LG washing machine may not drain water. Reasons could include improper water drainage, incorrect hose installation, a clogged filter leading to blockage, machine malfunctions, or a faulty drain pump... among other possibilities. In such cases, most users will need to know how to completely drain water from their washing machines. Specific instructions are provided below by Web So Sánh.
Precautions Before Draining Water
Firstly, carefully read the user manual provided by the manufacturer. Familiarize yourself with draining water and the water drain button on LG washing machines as instructed in the LG manual.
Next, it's essential to disconnect the power supply to eliminate the risk of electrical shock when draining water with the washing machine.
Prepare a few towels to prevent excessive water spills.
Get a bucket, basin, or an external drainage pipe ready.
Wait for the water to cool down before attempting to drain it or finding the water drain button on your LG washing machine.
Guide to the water drain button on LG front-load washing machines
Locate the position of the drainage filter.
Look for a small panel containing the drainage filter. Most panels have hinges for easy removal without the need for tools. If your panel is screwed, use a screwdriver to remove it.
Lift the front face of the machine.
Know that the water drain button or drainage filter on LG washing machines is located along the bottom of the machine. So, you need to pull the machine out and lift it a few inches off the floor. Use bricks or sturdy blocks to assist. Note that the washing machine is extremely heavy when filled with water. It's advisable to seek assistance.
Remove the control panel.
Pull the control panel away from the drainage filter. Place a towel underneath or a container to catch water.
Then, remove the water drain button on the LG washing machine. Loosen it slowly, opening just enough for the water to flow out gradually. Once full, tighten the filter again. Dispose of the water and repeat the process.
Guide to the water drain button on LG top-load washing machines
Pull the machine away from the wall.
Lift the front of the machine, have someone place a towel/blanket or something similar on the floor. When ready, pull the machine away from the wall. Stop only when you can see the drainage pipe and water drain button on the LG washing machine. If the machine is too heavy, open the lid and use a container to scoop out water. If not, it's best to seek assistance from 1-2 people.
Detach the drainage pipe from the wall.
You should detach the drainage pipe from its wall mount. Remember to keep the end of the drain hose higher than the washing machine. Even if you've scooped all the water out of the washing drum, it's still necessary to do this because there may still be water underneath the washing tub that is not visible.
Proceed with water drainage.
There's no need to find the water drain button on the LG washing machine because all you have to do is insert the end of the drain hose into a bucket or a container and the water will flow out automatically. You should lower the hose. Once the container is full, dispose of the water and repeat the above process.
Is it advisable to attempt water drainage on your own?
It can be said that finding the water drain button or the water drainage method on LG washing machines is not difficult. You can handle it yourself at home. However, if you're unsure about your physical strength or lack experience in troubleshooting issues, and find the suggested steps above challenging, you may consider seeking various home washing machine repair services.
Hopefully, articles like this will help you gain more experience so that you won't feel confused or worried about any situation when using a washing machine. Stay tuned for more engaging articles from Web So Sánh.
