Buzz
1. Introduction to the Moaz BéBé bottle sterilizer
Moaz BéBé is one of the suppliers of Mother and Baby care products in the Vietnamese market. Moaz BéBé's products include milk preparation, sterilization & drying, hygiene care, and health care products.
The Moaz BéBé bottle sterilizer is one of the product lines provided by Moaz BéBé originating from China. The product is designed and technologically advised by French experts. The design and price of the Moaz BéBé bottle sterilizer are quite reasonable, so it is favored by consumers, especially Vietnamese breastfeeding mothers.
2. Guide on how to use the Moaz BéBé sterilizer machine
If you've bought the Moaz BéBé sterilizer machine but find it difficult to use, here's the detailed guide for your reference:
2.1. Guide on how to use the 3in1 MB018 water boiling, sterilizing, and drying machine
To use the water boiling function on the Moaz BéBé MB018 sterilizer machine, follow these steps:
+ Press the On/Off button on the right side to start or stop the water boiling function
+ Press the “+” button to increase the temperature. The maximum temperature for heat retention can be set to 95 degrees
+ Press the “-” button to decrease the temperature, the lowest temperature for heat retention can be set to 37 degrees
+ Press “Mode” to select preset temperature levels according to WHO standards such as: 45 degrees, 55 degrees, 70 degrees for milk, 85 degrees for coffee; 90 degrees for tea
+ Press “Deho” to activate the automatic chlorine removal function 5 minutes after boiling water at 100 degrees
If you want to sterilize and dry bottles along with other accessories, you can:
+ Press the On/Off button on the left to turn on the machine (no need to press if using the water boiling function)
+ Press the “Auto” button to execute the automatic sterilizing and drying process
+ Press the “Dry” button to only perform the drying function
Important notes when using the Moaz BéBé MB018 sterilizer machine:
– Before the first use, clean the inside of the water boiling container, boil water once, pour it out, then continue filling it with water, boil it again, and use as usual
– The water poured into the glass container must not exceed the designated mark
– The sterilizing function of the machine pours 100 - 120ml of water into the heating base, do not overfill with water, avoid water entering the ventilation door, damaging the internal electrical parts.
2.2. Guide on how to use the Moaz Bébé MB – 005 milk warmer, sterilizer, and dryer
The sterilizing and drying function of the Moaz Bébé MB – 005 model:
Press and hold the “ON/OFF” button for 3 seconds to turn the machine on or off
(1) Place 120 ml in the sterilizing tray
(2) Put the rack into the sterilizing tray
(3) Place the baby bottle and nipple on the rack.
(4) Cover the sterilizing tray with the lid.
(5) Press the (Sterilize & Dry) button to activate the sterilizing and drying function, you can press “-” or “+” to select the total time for the process: 40 minutes, 50 minutes, 60 minutes. After 3 seconds, the machine starts sterilizing and drying, when the process is complete, the machine automatically shuts off with an audible alert.
If you want to use the drying function independently on the Moaz Bébé MB – 005 bottle sterilizer, follow these steps:
Press and hold the “ON/OFF” button for 3 seconds to turn the machine on or off
(1) Place the rack into the sterilizing tray
(2) Put the baby bottle and nipple on the rack.
(3) Cover the sterilizing tray with the lid.
(4) Press and hold both the “Sterilize & Dry” button and the “+” button simultaneously for 2 seconds to enter the independent drying function. Then press “-” or “+” to select the drying time: 30 minutes, 40 minutes, 50 minutes. After 3 seconds, the machine starts drying, when the process is complete, the machine automatically shuts off with an audible alert.
To use the warming function on the Moaz Bébé MB – 005 sterilizer, press and hold the “ON/OFF” button for 3 seconds to turn the machine on or off
(1) Place the baby bottle into the warming tray
(2) Pour an appropriate amount of water into the warming tray.
(3) Press the “Warm” button to initiate the warming process. Then press “-” or “+” to select the desired warming temperature. After 3 seconds, the machine starts the warming process (temperature range can be selected from 37 degrees to 60 degrees)
How to use the defrost function on the Moaz Bébé MB – 005 bottle sterilizer:
Press and hold the “ON/OFF” button for 3 seconds to turn the machine on or off
(1) Place the baby bottle into the warming tray
(2) Pour an appropriate amount of water into the warming tray.
(3) Simultaneously press the “Warm” button and the “+” button for 2 seconds, then the temperature display flashes for 3 seconds and emits a 3-second beep, then press “-” or “+” to select the desired temperature.
2.3. Guide on how to use the Moaz Bébé UV bottle sterilizer
+ Wash the baby bottle and breastfeeding accessories thoroughly and rinse them with clean water
+ Arrange the baby bottles vertically without stacking, try to maintain a certain distance between the bottles for air circulation.
+ Press the Dry mode to choose from time options 40 minutes, 50 minutes, 60 minutes
+ Press the UV sterilization mode to choose from time options 5 minutes, 10 minutes, 15 minutes
+ Press the Auto mode for combined drying and sterilization, default cycle until automatic shutdown is 50 minutes (including 40 minutes drying + 10 minutes sterilization)
*Note:
– Automatic preservation mode (Storage): Operates within 24 hours after the previous set main functions end. Every 2 hours, the machine automatically sterilizes with UV rays for 1 minute.
– Automatic keypad lock mode (Childsafe): When functions are active, all function keys are locked. To unlock the function keys, press the On / Off button, parents no longer worry about young children playing or mischievous actions, pressing randomly
During operation, if the machine's lid is opened and closed within 5 minutes, the machine will continue running the previously set function.
