Efficient and Safe Use of Your Philips Juicer

Transform your home with delicious and hygienic juices courtesy of Philips juicer. In this article, Mytour shares tips for effective and safe use of the Philips juicer. Check it out!

Efficient and Safe Use of Your Philips Juicer

Each model may vary slightly in features or control buttons, but in terms of the main structure, all Philips juicers include:

Philips HR1811 Juicer Structure

- Ingredient feeding tube

- Ingredient intake tube

- Safety lock mechanism

- Power switch

- Juice spout

- Anti-skid base

- Juice container

- Control dial: Fruit juicing mode - Vegetable juicing mode

Step 1: Prepare the fruits or vegetables for juicing

Wash thoroughly and cut into pieces suitable for the juicer. Remove seeds and tough skins (if any) to avoid damaging the machine.

Prepare the ingredients before adding them to the Philips juicer

Step 2: Set up the juicer machine

Place the Philips juicer on a flat, stable surface conducive to work. Ensure that accessories such as the water container, cutting blade, and drip tray are properly installed.

Step 3: Connect to power source

Connect the juicer to the appropriate power source and ensure that the power button is switched on.

Step 4: Juicing mode and speed

Select the appropriate juicing mode for the type of fruits or vegetables you are using. The Philips HR1811 juicer has 2 juicing modes: fruit juicing and vegetable juicing.

 2 juicing modes of Philips HR1811 juicer

Step 5: Juicing fruits or vegetables

Place the pieces of fruits or vegetables into the ingredient chute of the Philips juicer. Use the ingredient pusher to gently push the fruits down. Ensure even pressure and avoid excessive force to prevent damaging the machine.

Use the ingredient chute to prevent jamming the Philips juicer

Step 6: Collect juice

Use a juice collecting cup to collect the juice from the machine. Ensure the drip tray is positioned correctly under the juice spout.

Step 7: Clean the juicer

After use, turn off the machine and remove the accessories for cleaning. Wash the cutting blade, water container, and drip tray with warm water and mild soap. Ensure that all parts are completely dry before reassembly.

Step 1: Turn off the machine

Make sure the Philips juicer is turned off and disconnected from the power source before starting the cleaning process.

Step 2: Remove the accessories

Remove accessories such as the water container, cutting blade, and drip tray from the juicer.

Step 3: Clean the accessories

Clean the water container, cutting blade, and drip tray with warm water and mild soap. Use a soft brush or sponge to remove stubborn dirt. Ensure to thoroughly clean all parts of the accessories.

Clean Philips juicer accessories

Step 4: Clean the juicer body

Use a soft cloth to wipe clean the juicer body. If there are any stubborn residues, use a little warm water and mild soap to moisten the cloth and wipe them away. Ensure to wipe clean all crevices and surfaces of the machine.

Step 5: Dry the machine

To ensure the longevity of your machine, it's crucial to allow all accessories and the body to air dry or pat them dry with a clean cloth. Make certain all parts are completely dry before reassembly.

Step 6: Reassemble Accessories

Once all accessories and the machine body are thoroughly dry, proceed to reassemble them following the manufacturer's instructions.

- Avoid putting whole grain cereals or dried fruits with hard seeds or ice into the juicer, as this could damage its parts.

- Ensure the juice level does not exceed the designated mark to prevent overflow, which can damage the motor and mix juice with fruit pulp.

- When juicing different ingredients without the hassle of cleaning, utilize the machine's quick rinse feature. Simply close the smart lid and pour clean water into the juicing container up to the specified level. Turn on the machine and let it run for 15 seconds; it will self-clean the container and juicing screen. Then, open the smart lid to let the water drain out, and you can proceed to juice other types of fruits.

- To ensure pulp-free juice, it's advisable to clean the juicing chamber and screen weekly. Opt for pulp-free ingredients.

- To prevent corrosion and rust, avoid soaking the juicing blades in water. Instead, you can clean them with a brush under running water and ensure they are completely dry.

- Perform regular maintenance: Follow the manufacturer's instructions for regular maintenance by cleaning and sanitizing the machine. This includes cleaning the cutting blades, water reservoir, and other accessories to ensure optimal machine performance.

- Safety check: Before use, inspect the machine to ensure all accessories and components are properly installed and there are no signs of damage. If any issues are detected, discontinue use and contact the service center for prompt assistance and repairs.

The above are effective and safe ways to use the Philips juicer. Through this article, Mytour hopes you will find it easier to use your Philips juicer.