Efficient Home Cleaning Method for Kangaroo Evaporative Coolers

Regularly cleaning your Kangaroo Evaporative Cooler will maintain its cooling performance and longevity. Join Mytour to learn how to efficiently clean your Kangaroo Evaporative Cooler at home through the article below!

Efficient Home Cleaning Method for Kangaroo Evaporative Coolers

Apart from that, if you detect any foul odor emanating from the fan or notice a decrease in cooling efficiency, ensure to promptly clean the evaporative cooler to restore its cooling capability and air quality.

Ensuring Health Benefits

Kangaroo evaporative coolers function by blowing air through water for cooling. Without regular cleaning, bacteria, microorganisms, and pollutants can thrive in the water and within the fan system, leading to air pollution and potential health hazards.

Enhanced Cooling Performance

If the fan accumulates dirt, this buildup can decrease the cooling efficiency. Regular cleaning helps eliminate the buildup, allowing the fan to operate more effectively and produce cooler air.

Regular cleaning of the evaporative cooler maintains cooling performance

Increased Fan Lifespan

Regular cleaning helps protect and prolong the lifespan of the fan. Removing dust and dirt helps prevent technical issues, malfunctions, and ensures that the fan operates long-term.

Noise Reduction

If the fan accumulates dirt, it can generate noise during operation. Regular cleaning helps reduce noise and provides a better user experience.

Preparation

Disconnect the Kangaroo evaporative cooler from the power source.

Open the sediment drain valve and drain all the water from the reservoir before starting the cleaning process.

External Cleaning

Use a damp cloth to clean the surfaces above, below, front, and back of the fan, including the blade and control unit.

For the fan body, users should thoroughly wipe the blade area as it tends to accumulate the most dust.

- Wrap the cloth around your index finger and insert it into the gaps between the blades, wiping them clean.

- Take care not to wet the electronic components of the fan during the process.

Cleaning the fan blades of Kangaroo evaporative coolers

Note: When cleaning the exterior of the machine, users should apply gentle force, avoiding excessive pressure that may cause scratches on the equipment.

Cleaning the cooling pad and dust filter mesh

The dust filter mesh and cooling pad are two crucial components responsible for filtering out dirt and reducing air temperature as the airflow passes through. Therefore, these are two parts that accumulate a lot of dust and require thorough cleaning.

- Remove the rear panel of the machine to access the cooling pad, some models are large so you may need to use a screwdriver to remove them.

- Use a damp cloth to wipe away dust on the cooling pad if there is little dust in the slots. For cases where the Kangaroo evaporative cooler is not regularly cleaned, you should use a soft damp brush to scrub the slots or use a strong water hose to help the dirt flow out more easily.

- Similar to the cooling pad, use a damp cloth to wipe the dust filter mesh or use a soft brush to clean it. You can use soap on this part to increase cleaning effectiveness.

- After washing, take the cooling pad and dust filter mesh out to dry in the sun. Make sure these two parts are completely dry before reinstalling them into the fan.

Cleaning the cooling pad and dust filter mesh of Kangaroo air coolers

Note: Water used to clean the cooling pad must be clean, do not use soap or cleaning chemicals to clean the cooling pad.

Cleaning the water reservoir

The water reservoir can accumulate dirt over time and therefore needs to be cleaned more frequently. Typically, Kangaroo air coolers will have two types of water tank designs: a separate water tank and an integrated tank attached to the body of the machine.

For the detachable water tank type

- Remove the 2 fixing pins on both sides of the machine body and take out the water tank for cleaning.

- Use a small piece of cloth or a dishwashing sponge soaked in soap to clean the inside of the water tank.

- Rinse with clean water and use a dry cloth to wipe dry. Then, reinstall the water tank into the machine body.

Cleaning the water reservoir of Kangaroo evaporative coolers

For the integrated water tank type

- Use a piece of cloth or a dishwashing sponge soaked in soap to clean the inside.

- Use a clean damp cloth to wipe away soap suds and dirt inside.

- Repeat the process of rinsing with water and cleaning the reservoir until the inside is completely clean and free of soap odor.

Note: Do not spray water into the interior for the integrated water tank type as water may splash onto the motor, electronic circuit boards, leading to fan damage.

Cleaning the water pump

Despite its impact on the cooling ability of the fan, the water pump is often overlooked when cleaning the evaporative cooler.

- The water pump is typically fixed at the bottom of the water reservoir. Use a screwdriver to remove the water pump.

- After removing the pump from the reservoir, unscrew the pump cover, then remove the small fan blade cover and pull out the fan blade pin. Remove any dust, pet hair, or tangled hair from the fan blades to ensure smoother pump operation. Additionally, clean the fan blade shaft to remove scale buildup and dirt around it.

- Reassemble the pump components in their original order.

Cleaning the water pump of Kangaroo evaporative coolers

Cleaning the fan blades

Kangaroo evaporative coolers typically come with 2 types of fan blades: axial fan blades and centrifugal fan blades (fans with multiple small blades)

- Use a damp cloth to wipe away dirt on each fan blade.

- After cleaning the fan, let all the parts dry for 10-15 minutes before reassembling them onto the fan, ready for immediate use.

Earlier were detailed instructions on how to effectively clean Kangaroo evaporative coolers at home. Hopefully, the information provided by Mytour will be helpful in the usage process of Kangaroo evaporative coolers.