Buzz
There are various reasons causing ss, and if you are unsure, it can be difficult to pinpoint an accurate solution. However, we can try from simple to complex methods to fix the Touch ID issues, and the instructions below will guide you through the process.
1. Clean the Touch ID.
2. Re-register or add fingerprints.
3. Reset iPhone settings to default.
4. Update to the latest iPhone Firmware.
Touch ID Error: Malfunctioning, Not Working
Guide on How to Fix Touch ID Error: Not Working
1. Clean the Touch ID
Sometimes the issue of Touch ID error, not working is simply due to nothing else but 'dirt.' Neglecting to clean the Touch ID can result in poor recognition. Therefore, the first thing you should do is clean your Touch ID before exploring any other potential issues.
2. Re-register or Add Fingerprints
Re-registering fingerprints is a diagnostic solution to assess the severity of the Touch ID error, not working. The process of re-registering is likely not too unfamiliar if you've done it before.
Step 1: First, go to Settings on your device.
Step 2: Next, navigate back to Touch ID & Passcode and choose Add a Fingerprint... to add another fingerprint.
Step 3: Follow the system instructions here to add a fingerprint, ensuring it's different from the previous one.
Step 4: Continue following the system instructions to further enhance fingerprint acquisition.
After completing, simply press Continue to finish the fingerprint re-registration process.
After that, try unlocking your device again with the new fingerprint to see if the Touch ID error is truly resolved.
3. Thiết lập cài đặt iPhone về ban đầu
Bước 1: Thiết lập lại iPhone về ban đầu cũng là cách giúp bạn sửa lỗi Touch ID bị lỗi, không hoạt động và bạn có thể thực hiện công việc này bằng cách nhấn vào Settings.
Bước 2: Bước tiếp theo bạn vào phần General > lựa chọn Reset ở dưới cùng để tiến hành khởi động lại từ đầu.
Bước 3: Ở đây ngay tại phần đầu tiên sẽ xuất hiện một mục là Reset All Settings, nhấn vào đó để xác định xóa toàn bộ.
Step 4: Here, simply press Reset once again and let the system automatically restart.
4. Update to the Latest iPhone Firmware
Step 1: Updating your iPhone firmware is an effective way to fix the Touch ID error, not working. Go to Settings > select General > then choose Software Update to check and update.
Step 2: If there is an update available, simply press Download and Install to proceed with the installation.
Here are some ways to address Touch ID issues, and if applying these methods doesn't yield improvement, it might indicate a faulty Touch ID button. In such cases, choose an iPhone or iPad repair center accurately to ensure quality. There are numerous reputable locations to select an iPhone repair center in Vietnam that you can explore.
iPhone users often complain about their phones losing signal. So, what causes the iPhone signal loss issue, and how to fix it? Check out the methods to fix iPhone signal loss here and follow the instructions from Mytour.
