Buzz
In mid-range printers, components such as buttons and lights are minimized to reduce costs. Therefore, when faced with the blinking yellow light issue, we're uncertain of its exact cause and why it occurs. Naturally, encountering this issue leads to the printer receiving commands but not printing anymore, or displaying error messages on the screen depending on the specific case you encounter.
And of course, these errors are not necessarily caused by software but sometimes simply due to incorrect operations on the printer, perhaps mostly when retrieving paper jams. Whatever the reason, you need to know what the blinking yellow light issue is, and right now Mytour will help you do just that.
Guide to Fix Continuous Blinking Yellow Printer Light
1. Printer blinking yellow light due to paper jam
This is the simplest case to confirm. When the printer is jammed, the indicator light will illuminate immediately. Your task is to simply remove the jammed paper from the printer. To do so correctly, follow these steps:
- Turn off the printer's power completely before attempting to remove the jammed paper.
- Remove the toner cartridge cover and slowly remove the toner cartridge before removing the paper.
- Avoid using one hand to remove the paper. Use both hands and pull it out slowly, as using one hand can easily damage certain components such as the toner drum, large toner scraper, or small toner scraper. If possible, refer to our guide here, which will help you safely resolve paper jam printer errors and safely remove jammed paper.
2. Paper misplacement error
Printers are equipped with sensors to detect whether the paper is properly placed in the tray. If the paper is too thick or not properly aligned, initiating a print command will signal a continuous blinking yellow light error on the printer. Additionally, consider the following when placing paper:
- Ensure the paper is neatly aligned and placed squarely in the tray at the appropriate level. Most printers indicate size standards for easy alignment.
- Avoid using damp or wrinkled paper as it may lead to paper jams.
- Do not reuse previously printed paper as it may result in the aforementioned error. Additionally, be sure to remove any document clips before placing them in the tray to prevent fuser roller damage.
Above are two scenarios where the continuous blinking yellow light error may occur. Readers can apply and follow Mytour's instructions to ensure no further issues arise with the printer after resolving the error. Sometimes, if your printer is not receiving print commands, consider the aforementioned scenarios for troubleshooting.
