Buzz
One of the common problems with phone charging is the inability to charge the phone battery. In this article, Software Tips will guide you through the most common methods to resolve this issue.
1. Replace the Charging Adapter
For those who use a charging adapter to charge their phones, try switching to a different one to see if the current adapter is faulty. Inside the adapter, there are various electronic components that often work under high intensity, which can lead to malfunctions or internal burning. Additionally, opt for charging adapters with smart current control or standard current for your phone, as some phones automatically stop charging if they detect that the charging current is too high compared to the standard.
2. Changing the charging cable
Some high-end mobile devices have the ability to recognize genuine and counterfeit charging cables, specifically iPhones often encounter this issue. If you use a counterfeit cable, the device will immediately display a message saying 'accessory not supported' and you won't be able to charge your phone. Additionally, charging cables often experience internal wire breakage due to careless usage or being thrown around too much.
3. Wet charging port
Most modern mobile devices are equipped with water resistance features, and to further enhance safety, manufacturers often install a 'moisture sensor' under the charging port. This means that if the charging port gets wet, the system automatically disconnects the charging connection to protect the user and the device. In this case, you need to clean and dry the charging port with a cloth or cotton swab.
4. Cleaning the charging port
For Plug-in connections like phone chargers, they are particularly prone to 'dust', although charging ports cannot avoid this issue. When dust accumulates, the connecting copper pins of the charger cannot make proper contact, resulting in the inability to transmit electrical power. To address this issue, you need to clean them using specialized cleaning solution or alcohol.
Preparation:
- Cotton swab
- 90-degree alcohol or specialized cleaning solution
Procedure:
- Turn off the phone
- Moisten a cotton swab with 90-degree alcohol
- Use the moistened cotton swab to clean the charging port on the phone, while rotating to remove all dirt
- Wait for about 5 minutes and restart the phone
5. Maintain the correct distance when using wireless charging
Wireless charging is much more common nowadays, but few people know that it only works within a range of 10-15cm. So when you place mobile devices on wireless chargers, try to align them properly with the center of the charger for effective charging.
6. Internal charging pin breakage
The worst-case scenario is when the charging pins inside your phone break, and the only solution is to replace the charging circuit board. For this issue, take your phone to reputable warranty repair shops authorized to disassemble and inspect the charging pins.
In this article, Software Tricks has guided you on how to fix the issue of phone not charging. Wishing you all a wonderful day!
