Buzz
The black screen circle glitch often occurs during Windows 10 updates, where the screen only displays a black screen with a spinning circle indicating Windows startup, and the update process cannot proceed. The cause of this issue is usually due to registration errors during the update initialization, causing Windows 10 to fail to complete the update process and restart. Mytour will guide you through troubleshooting with just a few commands.
Fixing the black screen circle glitch during Windows update
Step 1: When the spinning circle screen appears, hold down the power button of your computer or laptop to perform a hot restart.
Step 2: Wait for Windows to fix the error and boot into the old operating system, click on the Start button, type 'cmd' in the search box.
Step 3: Right-click on the Command Prompt line that appears in the search results, select Run as Administrator to launch the command prompt program.
Step 4: Enter the following command lines one by one, pressing Enter after each command.
- reg delete HKEY_LOCAL_MACHINE\system\setup\upgrade\nsimigrationroot /f
- netsh int ipv6 set locality state=disabled
- reg delete HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nsi\{eb004a01-9b1a-11d4-9123-0050047759bc}\28 /f
Step 5: Restart your computer, proceed to check and update Windows, and observe any issues.
Here is a method to assist in fixing the black screen circle glitch during Windows 10 updates. You can follow these steps to resolve it. If update issues persist, you can reset Windows 10 and then proceed with updating to ensure you are using the latest version of the operating system.
During the Windows 10 upgrade process, in addition to the black screen circle error, the 0x8007042c error occasionally occurs on some computers. Fixing the 0x8007042c error on Windows 10 is also quite simple, as it relates to the firewall, so you just need to make a few adjustments to successfully fix the 0x8007042c error.
