Fixing USB Not Recognized Error in Windows 10

USB Not Recognized error is one of the common issues on Windows. In some previous articles, Mytour has guided you on how to fix USB Not Recognized error on lower Windows versions. In this article, Mytour will guide you on how to fix USB Not Recognized error in Windows 10.

Causes of USB Not Recognized Error in Windows 10

There are several causes of USB Not Recognized error in Windows 10, including:

- After users disconnect a USB drive from the port, the computer will disable that USB port and display this error message.
- Device drivers may be corrupted or unstable.
- Outdated drivers.
- External hard drives currently in a suspended state.
- Unstable or faulty USB controller.
- Outdated system hardware.

Fixing USB Not Recognized Windows 10

To begin with, you can diagnose the USB Device Not Recognized error on your computer to quickly find the best solution. Below are some ways to fix USB Not Recognized error in Windows 10:

Method 1: Restart your computer

The simplest and easiest way to fix USB Not Recognized error in Windows 10 is to restart your computer. Try restarting your Windows 10 computer or laptop and check if the USB Not Recognized error persists. If the error still exists, continue exploring some other troubleshooting methods below.

Method 2: Reinstall USB drivers

The error may be caused by a faulty or unstable USB drive. Try reinstalling the USB driver and reconnecting to see if the error persists. To do this, follow the steps below:

Step 1: Type device manager into the Search box on the Windows 10 Start Menu to open the Device Manager window.

Step 2: Here, locate and click on Disk Drives. Right-click on the USB drive driver causing the error, and select Uninstall.

Step 3: After the process completes, click on Action =>Scan for hardware changes to reinstall the driver.

Method 3: Update computer drivers

As mentioned above, the cause of USB Not Recognized Windows 10 error may be outdated or faulty drivers. To fix the error, try updating your computer drivers and check if the error persists.

Step 1: Type device manager into the Search box on the Windows 10 Start Menu to open the Device Manager window.

Step 2: If any driver displays Unknown Device or Unidentified USB device notification, right-click on it, and select Update to update the driver.

Step 1: Access Control Panel => Device Manager.

Step 2: In the Device Manager window, locate the driver causing the error, click on Action menu =>Scan for hardware changes, and perform hardware updates.

Method 6: Disable USB Selective Suspend Setting

In addition to the causes mentioned by Mytour above, the USB Selective Suspend Setting can also be the cause of the USB Not Recognized error in Windows 10. To fix this error, the solution is to disable USB Selective Suspend Setting. Follow the steps below:

Step 1: Open Control Panel, find and open Power Options.

Step 2: In the Power Options window, click on Change plan settings.

Step 3: Next, select Change advanced power settings.

Step 4: Access USB settings and click on [+] to expand the USB selective suspend setting.

Step 5: Click on Plugged in and select Disabled.

If using a laptop, in the Battery section, select Disabled and then click Apply =>OK.

Method 7: Utilize Windows USB troubleshooter

Step 1: Download Windows USB troubleshooter to your machine and install it.

Download Windows USB Troubleshooter to your computer and install it here: Download Windows USB Troubleshooter

Step 2: Next, run the Troubleshooter to detect and fix USB issues on your computer.

Method 8: Fix USB Root Hub Error

Step 1: Open Device Manager, find and expand Universal Serial Bus controllers.

Step 2: Find and right-click on USB Root Hub =>Properties.

Step 3: Click on the Power Management tab and uncheck All the computer to turn off the device to save power, then click OK.

Step 4: Repeat the same steps if there are multiple USB Root Hubs, then click OK to complete the process.

Step 5: Restart your computer, then try reconnecting the USB to see if the error persists.

Method 9: Modify Power Settings

Step 1: Open Control Panel =>Hardware and Sound =>Power Options.

Step 2: Click on Choose what the power button does =>Change the settings that are currently unavailable.

Step 3: Uncheck the option Turn on fast startup =>Save changes.

Step 4: Restart your computer and reconnect the USB drive to check if the issue persists.

In this article, Mytour has just provided you with some solutions to fix the USB Not Recognized error on Windows 10. Moreover, if you encounter the USB device not recognized error while using a USB mouse, you can refer to the steps to fix the error and continue using your mouse on the computer.