Buzz
According to Microsoft, the Wi-Fi limited error in Windows 10 stems from VPN version incompatibility rather than router password changes, as commonly believed. Recognize the signs of this issue, characterized by the yellow exclamation mark on the Wi-Fi signal icon and lack of network connectivity on Windows 10.
Resolving Wi-Fi Limited Issue in Windows 10: Ensure seamless internet access on Windows 10 by addressing the Wi-Fi limited error effectively. Explore solutions to overcome this connectivity hurdle and regain smooth browsing.
If your device is showing a wifi with a gray dot, let's follow Mytour's instructions to fix the gray dot wifi issue right away.
Method 1: Restart Modem to fix wifi limited on win 10
This is the easiest method that almost everyone uses, which is Turn off the power or press the Reset button on the Modem to fix the wifi limited issue on windows
In addition, you can also operate directly on the computer.
Step 1: Go to Start and select Command Prompt (Admin)
Your modem will automatically restart. If this method still doesn't fix the Wifi Limited issue, then move on to method 2.
Method 2: Reinstall Wifi Driver for Laptop to fix wifi limited on win 10
Step 1: Press the Taskbar button to open the Run dialog, or use the Windows + R key combination
Step 2: Type this command into Run -> devmgmt.msc
Step 3: Right-click on Computer -> Manage
Method 3: Reset TCP connection
Sometimes resetting the TCP connection can also fix Wifi Limited Win 10 issue, fixing gray dot wifi in windows 10. To reset the TCP connection, follow these steps:
Step 1: Right-click on the Start button at the bottom left corner of the Taskbar, select Command Prompt (Admin).
Step 2: On the Command Prompt window, type each of the following commands then press Enter:
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global rss=enabled
Step 3: Next, enter the command below to confirm that the previous functions have been disabled:
netsh int tcp show global
Step 4: Finally, close the Command Prompt window.
Method 4: Check antivirus software settings
According to some users' reports, the cause of Wifi Limited Win 10 issue, fixing gray dot wifi in windows 10 could be antivirus software. Therefore, to fix the issue, you can adjust some settings, or in case if you can't identify the culprit settings, Mytour recommends temporarily disabling antivirus programs and checking if the issue persists.
If the issue persists, try uninstalling the antivirus program on your computer and check if the issue persists. If the culprit causing the issue is the antivirus program, try switching to other antivirus programs like Bitdefender, BullGuard, Panda Antivirus, ...
Method 5: Run Windows Networking Troubleshooter
Microsoft includes a built-in Troubleshooting tool in its Windows operating system, assisting users in resolving system-related issues, including Wifi Limited problems.
To run Windows Networking Troubleshooter to fix Wifi Limited Win 10 issue, fixing gray dot wifi in windows 10, follow the steps below:
Step 1: Type troubleshoot into the Search box on the Start Menu, then click on it from the list of results to open Troubleshoot.
Step 2: Choose Network Adapter then proceed to select Run the troubleshooter
Step 3: Follow the on-screen instructions to fix Wifi Limited Win 10 issue, fixing gray dot wifi in windows 10.
Method 6: Assign IP address manually
By default, Windows 10 automatically assigns IP addresses to devices on the network. However, sometimes this can be the culprit causing Wifi Limited issue, gray dot wifi problem on Windows 10. So, to fix Wifi Limited Win 10 issue, fixing gray dot wifi in windows 10, try assigning IP addresses manually to see if the issue persists.
Step 1: Click on the network icon in the Taskbar and then select the network you're using from the menu.
Step 2: Click on Change adapter options.
Step 3: Find and right-click on your network, select Properties.
Step 4: Select Internet Protocol Version 4 (TCP/IPv4) then click on Properties.
Step 5: Select Use the following IP address and set up the address as follows:
- IP address: 192.168.1.25
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.1.1
After completion, click OK to save the changes.
Note: You must change the IP address according to the Default gateway.
To find the Default gateway, simply check the network properties on your computer or Internet access devices. If the IP address is manually set, choose Obtain IP address automatically and check if the issue persists.
Method 7: Change DNS
Not excluding the possibility of DNS being the culprit of the issue. To fix Wifi Limited Win 10 issue, fixing gray dot wifi in windows 10, try switching to Google or OpenDNS DNS and check if the issue persists. Follow the steps below:
Step 1: Click on the network icon in the Taskbar then select the network you're using from the menu.
Step 2: Click on Change adapter options.
Step 3: Find and right-click on your network, choose Properties.
Step 4: Select Internet Protocol Version 4 (TCP/IPv4) then click on Properties.
Step 5: Select Use the following DNS server addresses and set up the addresses as follows:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
Step 6: Click OK to save the changes.
Additionally, you can also use OpenDNS. However, note that switching DNS may help fix Wifi Limited Win 10 issue, but this solution may slow down your network connection.
If using custom DNS, select Obtain DNS server automatically and save the changes.
Method 8: Reset the router
Some users share that Wifi Limited Win 10 issue may occur due to router configuration, resetting the router to default settings can also fix this issue.
To reset the router, you access the router configuration page and select the Reset option. Or the fastest way is to press the hidden Reset button on the Router. Additionally, for more details on how to reset the router, you can refer to the router user guide.
Method 9: Reset BIOS to default settings
If none of the above methods are available, try fixing Wifi Limited Win 10 issue, fixing gray dot wifi in windows 10 by resetting BIOS to its original default state. If integrated network card, you can configure the network card right on the BIOS.
Some BIOS settings may affect network configuration and cause Wifi Limited Win 10 issue. To fix the issue, you need to reset BIOS to default settings.
Method 10: Downgrade to the previous version of network driver
Sometimes the issue may occur due to Windows automatically updating network drivers. To fix the issue, simply downgrade to the previous version of the driver. To do this:
Step 1: Open Device Manager, then find and double-click on the network card you're using to open the properties window.
Step 2: Access the Driver tab, click on Roll Back Driver. If this button is not available, click on Uninstall Device to remove the driver.
Finally, restart your computer, Windows will automatically update missing drivers and check if the issue persists.
In addition to the above methods, you can use software to automatically install drivers like Driver Easy to fix wifi limited win 10. This is an automatic software that searches, identifies missing drivers on your computer. After Driver Easy scans for missing drivers, simply download and install them.
