Buzz
If you own the AVR-X2700HBKE2 amplifier, the user guide for the Denon AVR-X2700HBKE2 from Electronics - Furniture Mega Market could be very helpful for you. Read on to learn how to operate the amplifier quickly and easily!
User Manual for Denon AVR-X2700HBKE2 Amplifier
1. Function Button System on Denon AVR-X2700HBKE2 Amplifier
● Off: Standard standby mode.
● Red: When “HDMI Pass Through” is set to “On”; When “HDMI Control” is set to “On”; When “Network Control” is set to “Always On”.
3. Input selector knob.
4. Remote control sensor: This sensor receives signals from the remote control device.
5. Display: Shows various types of information.
6. MASTER VOLUME Knob: Adjusts the volume level.
7. TUNER PRESET CH +, –: Buttons for selecting preset broadcast channels.
8. ZONE2 POWER ON/OFF Button: Controls the power state of ZONE2 (when using multi-room mode).
13. Headphone Jack: Used for connecting headphones.
14. MIC SETUP Jack: Used for connecting a microphone for audio calibration.
15. USB Port: This port is used to connect to other devices via USB port.
Denon AVR-X2700HBKE2 Amplifier Remote
1. ZONE SELECT Buttons: Switch control from main room to secondary room (when using multi-room mode).
2. Input Source Selection Buttons.
3. Channel Search Buttons.
4. MUTE Button: Turns off audio output.
5. INFO Button: Displays status information on the TV screen.
6. Navigation Buttons: Move to select between options.
7. BACK Button: Used to return to the previous screen.
8. System Buttons perform playback-related operations. Tune Buttons (+, -) operate the tuner.
9. QUICK SELECT Buttons: Access registered settings for each button, such as input sources, volume levels, sound modes,...
10. SOUND MODE Buttons: Select sound modes.
11. Remote Signal Transmitter: Transmit and receive signals from remote control devices.
12. SLEEP Button: Set a sleep timer for the amplifier.
Press the POWER button to turn on the device. You can press the input source selection button when the device is in standby mode to power on, or you can also switch to standby mode by pressing the POWER button on the amplifier.
Press the input selection button to directly choose the desired input source, or you can also select the input source by rotating the SOURCE SELECT knob on the main device.
Denon Amplifier Source Select Button
Adjust the volume using the VOLUME button or you can also adjust the volume by rotating the MASTER VOLUME knob on the device.
By connecting your smartphone, tablet, etc., to the Denon amplifier via Bluetooth, we can enjoy music files from those devices on the amplifier. The Bluetooth connection range will operate well within about 30m. Once the Bluetooth device has been paired for the first time, we do not need to pair it again for subsequent uses.
Pairing Bluetooth with Denon AVR-X2700HBKE2 amplifier
Step 5: Stream music from any mobile application.
Here are some directions on using the Denon amplifier effortlessly and swiftly.
