Guide on how to clean the filter of Samsung air conditioner

After a period of use, it is necessary to regularly clean the air conditioner. This article will guide you on how to clean the filter of Samsung air conditioner for optimal performance and durability.

Dust accumulation inside the air conditioner will reduce cooling efficiency and consume electricity.

Cleaning the filter of wall-mounted air conditioner

Step 1. Slide the filter out of the device.

Step 2. Use a soft brush or a vacuum cleaner to remove all dust or debris on the filter.

Step 3. If the filter has a lot of dust, soak it in soapy water for about 30 minutes and then rinse thoroughly.

Step 4. After washing the filter, let it air dry in a well-ventilated area.

Step 5. Reinstall the filter.

Note:

- Do not scrub the air filter with stiff bristle brush or other abrasive cleaning tools.

- If the air filter is not completely dry or dried in a confined (or humid) area, it may develop odors.

- Avoid exposing the air filter directly to sunlight when drying.

Cleaning the filter of floor-standing air conditioner

If your home air conditioner is a floor-standing type with inverter, check the following steps. The floor-standing model with inverter has two types of filters.

Full HD filter: This filter screens large dust particles from the air.

Zero filter: This filter retains small dust particles in the air. It can be washed and used permanently.

Step 1. Pull out the Full HD filter in the direction indicated by the arrow in the image below.

Step 2. Remove dust using a vacuum cleaner or rinse under running water.

Step 3. Completely dry the filter in a shaded, cool area.

Step 4. Push the Full HD filter all the way to the end in the direction of the arrow to ensure complete fixation.

Note:

- Clean the FullHD filter every two weeks.

- The cleaning frequency may vary depending on usage conditions and environment.

Cleaning the Zero filter

Be cautious of the sharp back surface of the Zero filter. You may get injured on your hand.

Step 1. Remove the Full HD filter below. Grip the handle on the Zero filter and remove the filter by pulling it in the direction indicated by the arrow in the image.

Step 2. Soak the filter in water and shake it up and down several times.

Step 3. Dry the filter in a well-ventilated area.

Step 4. Push the Zero filter in the direction of the arrow and ensure the filter is securely fixed in place. Place the Full HD filter back below.

Note:

- Clean the Zero filter once every 3 months. (Based on 8 hours of daily usage.)

- The cleaning frequency may vary depending on usage conditions and environment.

Cleaning the multi-purpose air conditioner filter

Tips for removing the multi-purpose air filter

Hold the grille with one hand to prevent it from falling out.

Once the grille is fully removed, detach the safety hooks on both sides of the grille.

Note:

- The actual design of the air conditioner may vary depending on the model type (or in your region).

- Please carefully read all warnings and important safety instructions in the user manual.

- Cleaning the air filter

Step 1. Slide the air filter to the right.

Step 2. Remove all dust from the air filter using a vacuum cleaner or brush.

Step 3. Clean the filter with a vacuum cleaner or soft brush. If heavily soiled, rinse under running water and let it dry in a well-ventilated area.

Step 4. Allow the cleaned air filter to dry in a well-ventilated area.

Step 5. Reinstall the air filter. (Perform in reverse order to the removal process.) Then, place back the air filter.

How to reinstall the filter

- For remote-controlled indoor units, press the Filter Reset button.

- For wireless remote-controlled indoor units, press the Options or Filter Reset button, then press the SET button.

With these tips, we hope you'll gain more experience in properly cleaning your air conditioner. If you have any questions or need to purchase a Samsung air conditioner, call the Mytour supermarket hotline at 028-38563388 for the best advice and support from our staff!