Buzz
During the use of electronic devices like dishwashers, we often encounter basic errors. For example, Electrolux dishwasher not draining. What are the causes? How to fix it? Today's article by Mytour will provide the quickest solutions.
Reasons for Electrolux Dishwasher Not Draining
When experiencing the issue of Electrolux dishwasher not draining, consider these 4 main reasons:
- The drain pump of the dishwasher may be damaged.
- The dirt filter may be clogged and needs cleaning.
- The drain valve may be blocked or faulty.
- Incorrect use of detergent.
When the dishwasher fails to drain water, it will sound 3 beep alerts. You should proceed to check the device to identify the cause of the water accumulation.
How to Fix Water Accumulation in Electrolux Dishwasher?
Here are some remedies for when your Electrolux dishwasher cannot drain water that you can refer to and apply at home immediately.
1. Clogged Filter
The most common reason why an Electrolux dishwasher fails to drain water is food particles, grease, and dirt clogging the filter. Therefore, before putting dishes into the machine, it's crucial to remove all remaining food scraps.
Steps to Clean the Filter:
- Step 1: Unplug the dishwasher
- Step 2: Remove the dish rack, detach the lower spray arm
- Step 3: Remove the filter by turning counterclockwise until the filter compartment comes out
- Step 4: Use paper towels and cloth to soak up any remaining wastewater.
- Step 5: Dispose of all food residue, debris clinging inside
- Step 6: Clean the filter with soap and a soft brush under running water.
- Step 7: Clean the pump head
- Step 8: Run a short wash cycle to clean any remaining dirt during cleaning.
2. Clogged Drain Hose Causing Dishwasher Not to Drain
The dishwasher drain hose is usually connected to the sink drain pipe. Over time, wastewater from the sink mixes with excess food and grease, causing the drain pipe to clog, leading to the dishwasher pump not being able to drain water.
How to Clean the Drain Hose:
- Step 1: Remove and pull out the dishwasher drain hose from the system, clean the hose head if clogged.
- Step 2: Remove the U-shaped section of the drainpipe system and clean this section. The main reason is that the drainage system is blocked, and this U-shaped section is often blocked.
- Step 3: Reassemble after cleaning both pipes.
- Step 4: Run a short wash cycle to clean any remaining dirt during cleaning.
3. Weak or Non-Functioning Pump
If you have followed the above 2 methods and the water still doesn't come out, it may be due to the pump not working or the pump being weak. When encountering this issue, professional technicians' assistance is required.
4. Electronic System Error
There are other reasons why water may accumulate at the bottom of the machine, such as a malfunctioning software module. It controls the processes that the machine is designed for, providing commands to execute functional tasks with all systems.
If it's damaged, issues can occur during the dishwasher's operation. In this case, contact professional technicians for timely resolution.
Conclusion
Above are the reasons and solutions for Electrolux dishwasher not draining that Mytour provides for your reference. We hope this article is helpful to you.
