Buzz
Prepare before replacing the battery
- Ensure to use genuine robot batteries compatible with the device for optimal performance and durability. Additionally, have a screwdriver and approximately 5cm wide adhesive tape ready for easy removal and replacement of the robot battery.
Instructions for execution
- Step 1: Firstly, switch off the power to the device to ensure safety during the process. Then proceed to remove the dust bin and all screws on the underside of the robot, near the wheel and brush assembly.
- Step 2: Securely attach adhesive tape to both ends of the battery tray, then gently pull the battery out to avoid damaging internal components.
- Step 3: Next, insert the battery correctly, ensuring it is placed with the positive and negative terminals aligned correctly.
- Step 4: As a final step, reassemble all components of the vacuuming robot to their original positions, initiate a test run to ensure completion.
3. Important Notes to Prevent Battery Drainage in Vacuuming Robots
3.1. Proper Battery Charging
To ensure optimal performance, the vacuuming robot should be fully charged before use. Avoid intermittent charging and direct charging without using the charging dock to maintain stable power supply during the charging process.
Additionally, for newly acquired vacuuming robots, it is recommended to fully charge the battery for 8 hours before initial use to maximize battery lifespan.
3.2. Power Off When Not in Use
To ensure prolonged battery life, it's advisable to fully charge the robot and power it off when not in use. This helps prevent battery degradation while ensuring the device's longevity.
Avoid exposing the robot to water. During operation, steer clear of wet areas such as bathrooms or puddles on the floor. This precautionary measure prevents electrical short circuits and safeguards both the robot's battery and your family's safety.
Place the device in dry areas, away from heat sources. The robot vacuum's charging station should be situated in a dry, well-ventilated spot, avoiding dampness and heat sources. Ensure there's a clear space of 1.5 - 2 meters on both sides and in front of the charging station to allow the robot to return accurately.
This article from Mytour provides guidance on effectively charging your robot vacuum's battery and tips to prevent battery depletion. Share it with your friends and family to spread the knowledge. Thank you for reading!
If you have no long-term usage needs, it's best to fully charge the robot's battery and power down the device. This helps prevent battery depletion while ensuring the device's lifespan.
Ensure the robot's docking station is placed in a dry, cool area, away from moisture and heat sources. Maintain a clear space of 1.5 - 2 meters on either side and in front of the charging dock to facilitate the robot's accurate return.
