Buzz
After updating to Windows 10 1903 May 2019, many users are likely to encounter various minor issues, and one of the many feedbacks Mytour receives is related to network setup issues for Windows 10 version 1903. Specifically, users may not be able to access the network even after installing all the drivers. This is a minor issue in Windows 10 version 1903, so you can quickly fix it through the instructions below. But first, if you haven't used this version yet, update Windows 10 1903 here.
Network Setup for Windows 10 version 1903
Guide to Network Setup for Windows 10 version 1903
Step 1: To set up network on Windows 10 version 1903, readers simply need to follow the instructions below. First, open the RUN tool by pressing the Windows + R key combination, then type cmd. However, please note that instead of clicking OK, press the Ctrl + Shift + Enter key combination.
Right after that, a black box will appear with the line C:Windowssystem32>, indicating that you have successfully opened Command Prompt with Administrator privileges.
Step 2: From here, we will work with commands to help set up network for Windows 10 version 1903.
- First, type netsh winsock reset then press enter.
- Next, type netsh int IP reset then press enter.
- After typing, type ipconfig /release then press enter. This command allows you to release the currently assigned IP for your machine.
- Type ipconfig /renew then press Enter. This command requests the system to assign a new IP for your machine.
- Finally, type the command ipconfig /flushdns to clear the cache. This is necessary to ensure everything returns to a fresh state.
Step 3: However, the job isn't finished yet because we still need to reset the Network. Now, open StartMenu and type network reset and access the search results.
Step 4: Here, click on reset now to proceed with restarting the network system immediately.
Confirm YES once again for network reset.
Step 5: Finally, there will be a notification that the network will reset in 5 minutes, meaning a system reboot. If you prefer, you can restart the system now to skip this step.
Afterward, restarting your computer will show that network setup for Windows 10 version 1903 is complete. Your network will return to normal operation. The guide to network setup for Windows 10 version 1903 ends here.
Mytour hopes that with the above instructions, readers can quickly overcome any issues they may encounter. Furthermore, Mytour has also updated a comprehensive guide to errors when updating Windows 10 May 2019, which is where you can view and troubleshoot any issues you encounter, as well as fix Windows 10 May 2019 update errors with the instructions provided in the article.
