Buzz
1. How to Measure Blood Oxygen Saturation with Beurer Finger Clip SpO2 Monitor
Measuring blood oxygen saturation with the Beurer Finger Clip SpO2 Monitor is straightforward with the following steps:
1. Cách đo nồng độ oxy máu bằng máy đo SpO2 kẹp ngón Beurer
Cách đo nồng độ oxy máu bằng máy đo SpO2 kẹp ngón Beurer khá là đơn giản với các bước như sau:
Step 1: Open the clamp, place your finger on the sensor tip at the end of the device
Step 2: Press the power button on the device to initiate the measurement, ensuring you remain still and quiet
Step 3: The measurement result will be displayed on the device screen within a few seconds
For Beurer Finger Clip SpO2 Monitors equipped with data storage functionality, you can access settings by pressing and holding the function button. A menu will appear, allowing you to customize memory settings or other functions of the monitor.
2. Using Beurer's SPO2 – Viewer and Manager Software
For detailed and clear observation, users can connect their Beurer Finger Clip SpO2 Monitor to a computer or smartphone via USB or Bluetooth, depending on the device type. Your device should come with Beurer's SpO2 – Manager software pre-installed, available for download from the app store or included on a CD accompanying the monitor.
In that case, simply install the software on your device by running the SpO2Setup.exe data file, then follow the software's instructions.
3. Key Considerations for Accurate Use of Beurer SpO2 Monitor
To ensure accurate readings with the Beurer SpO2 Monitor, users should note the following:
– Check to ensure all accessories are complete in the Beurer Finger Clip SpO2 Monitor packaging
– Ensure the device and accessories show no signs of damage.
– If any damage is detected, refrain from using the device and contact customer support or authorized retail outlets.
– Only use genuine accessories from the manufacturer.
– Do not attempt to open or repair the device under any circumstances to ensure its proper functioning. Otherwise, the warranty will be voided.
Furthermore, to ensure accuracy, DO NOT USE the Beurer Finger Clip SpO2 Monitor if:
– You are allergic to products containing rubber material.
– The device or the finger being used is wet.
– While undergoing MRI or CT scans.
– While measuring blood pressure with a cuff on the same arm.
– On a finger with nail polish, dirt, medication, or adhesive bandage.
– On a large finger that doesn't fit into the device (finger width: > 20mm, thickness: > 15mm)
– On a finger with anatomical changes, swelling, scars, or burns.
– On a very small finger, such as a small child's finger (finger width: < 10mm, thickness: < 15mm)
– On individuals with tremors.
– Near flammable or explosive gas mixtures.
– The Beurer PO80 SpO2 blood oxygen and heart rate monitor is designed to be simple and user-friendly.
With the information provided above, we hope you have grasped the key points for using the Beurer SpO2 Monitor accurately.
