Buzz
Introducing two dust-sucking robots from EUREKA - the NER600 and NER800. Both models feature intelligent functions for cleaning, sweeping, and sucking, controllable via the EUREKA app. However, the NER800 impresses me more with its standout features such as automatic power boost for carpet overcoming, electrolyzed water technology for floor sterilization, and more...Join me as we explore articles and videos reviewing these two products.NER800: The Mighty Cleaner
Well-Crafted Design
Vibrates During Mopping
- The NER800 series robot is equipped with a vibrating electric mop device, operating at a high frequency of 500 times per minute, vibrating horizontally and rubbing back and forth, simulating human hand motions when cleaning floors, integrating sweeping and mopping simultaneously.
- The device starts vibrating from both sides before focusing on the center, compared to conventional electric water tank functions, this feature effectively increases cleaning efficiency by 78%.
- Dual symmetrical mop pads operate with low vibration, minimal noise, and stability, vigorously scrubbing the floor with high frequency for a cleaner surface. Additionally, different vibration modes can be set for different routes.
Next to the LIDAR sensor are two buttons to activate the robot and initiate the floor mopping mode. The robot is also equipped with up to 30 different sensors, including 4 height sensors to aid in stair avoidance and falls from steps or floors. Furthermore, the robot features sensors to enhance obstacle avoidance capabilities.At the front of the machine, there is a collision avoidance component, combined with 2 side brushes, to clean along wall edges without causing strong collisions. The side brushes help the robot clean corners and edges more effectively.Suction Capability
At the bottom, the robot features a V-shaped roller brush with sturdy bristles, making it easy to sweep away hair or deeply embedded in thick carpet surfaces to remove pet hair and animal fur trapped underneath.The robot is equipped with 2 large sawtooth wheels that enable it to move and overcome thresholds vigorously, navigate obstacles, and self-rescue if trapped by objects on the floor. With automatic power boost, the robot can detect this and automatically increase suction power for enhanced cleaning efficiency.The machine utilizes a brushless BLDC motor, eliminating the need for carbon brushes, reducing noise, and providing a suction power of 4000Pa, a common suction level among high-end robotic vacuum cleaners.With a large capacity 5200mAh battery, it supports continuous operation for up to 180 minutes, cleaning an area of up to 250 square meters. The device employs a 3-layer efficient filtration system, utilizes infrared sensors for obstacle avoidance, mapping, and can be controlled via a smartphone application.Electric Bacteria Eliminator - Sanitize Your Floors
NER800 Series features an effective floor mopping function using electric disinfectant without the need to purchase additional floor cleaning water. After installing the water tank, the robot proceeds to electrolyze natural water into disinfectant, with the water tank's vibration modes ensuring even water distribution, effectively killing up to 99.9% of bacteria.NER600
EUREKA NER600's design features a glossy plastic overall, making it more prone to fingerprints and dust compared to NER800. The sensor component is positioned centrally on the surface rather than flush with the edge like NER800. The control panel has a large power button, making it easy to operate.
At the front end, the device also has a collision avoidance component when cleaning close to wall edges. NER600 has a slightly squared-off design at the corners, making it easy to maneuver and coupled with 2 side brushes for cleaning edge and corner areas effectively.
The device has a combined 2-in-1 water and dust tank, located in the same position rather than separate compartments like NER800. The dust bin has a capacity of 600ml and the water tank holds 250ml. The device also uses electricity to pump water, and users can adjust water release at 3 levels via the phone app to prevent water leakage. There are no blind spots in the tank, thus reducing the risk of dust buildup, making cleaning easier. The HEPA filter can be replaced, filtering fine dust and allergens.
The robot can be remotely controlled via the Eureka app, allowing various functional operations once connected.Currently, there is no official pricing information available, but I believe both products will suit many users due to their intelligent features and user-friendly operation.
