Buzz
Finding the IP address of your Windows 10 Router is not a challenging task. There are several ways to help you discover the IP address of your Windows 10 Router. Sometimes, you might wonder why you need to find the Router's IP address. Imagine your network is like a company with numerous modems and routers connected. How do you identify your Router and find the IP address of your Windows 10 Router? That's the solution.
The following methods to find the IP address of your Windows 10 Router are not limited to Windows 10; you can also apply them to previous operating systems like Windows 8, 8.1, or even older ones like Windows 7. Any method can be applied, and depending on your system, the results may vary.
Guide on Finding IP Address of Windows 10 Router
1. Use Command Prompt to Locate IP Address
Finding the IP address of your Windows 10 Router using an IP is one of the most common methods you can employ.
Step 1: Open the Run dialog by pressing Windows + R and type cmd, then press OK to open Command Prompt.
Step 2: Once the Command Prompt is open, type the command ipconfig to check the IP addresses of your machine and Router.
The result will show, and you need to look for the Default Gateway line to find the accurate IP address of the Router. This is also the easiest way to find the IP address of Windows 10 Router that you can apply.
2. Locate IP Address in Adapter Settings
Apart from using commands, there's another effective way to find the IP address of Windows 10 Router, with a user-friendly interface compared to the DOS interface that Command Prompt provides.
Step 1: Open the Start Menu, type 'control panel', and access the found result.
Step 2: In the Control Panel, click on view network status and tasks under Network and Internet.
Step 3: Here, click on Ethenet to access the network settings you are using.
Note: If you are using Wifi, this will be the name of your Wifi.
Step 4: Next, go to the Details section, where you will find the IP address of Windows 10 Router.
In the IPv4 Default Gateway section, you will see the IP address of your Router or modem.
3. Find the IP address of Windows 10 Router using software
Using software to find the IP address of Windows 10 Router is a method that provides quick, accurate, and detailed results. For the most effective way to find the IP address of Windows 10 Router, we recommend using the free software Advanced IP Scanner, which gives you the fastest results.
Moreover, the software also reveals the brand of your Router or Modem in use. While not detailed, it's enough for you to recognize the device you're using.
4. Utilize data repositories from websites
Some web services gather data about Modems to provide users with basic information about those devices. This helps you discover the default IP of your Router or Modem. While not highly applicable for system-wide IP searches, it's a method to find the IP address of Windows 10 Router in case you don't know your default address.
Simply access the link HERE and find the corresponding Modem you're using.
Then click on the device to find out how your device is configured by default.
Here are ways to help you find the IP address of Windows 10 Router. The article provides you with valuable information, so it's recommended to read the entire article to equip yourself with basic knowledge about networks and IP.
For those using FPT modems and not knowing how to find the IP address of FPT modem, connect, and set it up, Mytour will help you with that right here. Check out the detailed article on FPT modem IP addresses.
