Buzz
The resurgence of jade facial rollers underscores the growing emphasis on natural, holistic beauty products. These rollers are crafted to alleviate facial puffiness by massaging your muscles and enhance the absorption of skincare products by clearing your pores. However, regardless of your motive for utilizing a jade roller, maintaining proper cleanliness and hygiene is imperative.
Procedures
Cleansing Your Roller
Detach the jade stone from the roller. Grip the right side of the roller bar with your thumb and forefinger, keeping the roller bar steady. With your left hand, grasp the jade stone and pull it to the left until it separates from the bar. Ensure the roller bar remains stationary while removing the stone.
- If you're left-handed, hold the roller bar with your left hand and use your right hand to detach the jade stone.
Create a cleaning solution by mixing 8 parts water with 1 part ammonia and 1 part dish soap. Blend the ingredients in a clean, large bowl, and gently stir them together using a fresh cloth until fully dissolved.
- Avoid using harsh soaps and cleaners like alcohol and acetone whenever possible, as they can damage the ornamental stones.
- Always ensure thorough cleaning and drying of your roller after using ammonia, as failure to do so may lead to skin irritation.
Soak a soft cloth or brush in your cleaning mixture. Ensure your cleaning tools are new and clean. For brushes, especially, ensure they are unused to prevent excess pigments from contaminating the jade and clogging its pores.
- You can opt for a fresh, unused toothbrush instead of a brush if desired.
Apply the cleaning solution onto the roller's surface. Gently apply the solution with light pressure. Rinse the entire roller under warm water while continuing to gently apply soap. For delicate or fragile rollers, be cautious of potential scratches.
- If you observe any scratching, cease wiping and inspect your cleaning tool for particles. Consider replacing it with a new one for safety.
Disinfecting Your Roller
Disinfect your roller on a weekly basis. If you frequently use your roller, regular disinfection is essential to prevent the spread of germs or bacteria to your facial skin. For rollers used in professional settings, sanitize them after each use. You can sanitize the jade stone using rubbing alcohol or boiling water.
After cleaning your roller, apply rubbing alcohol for quick sanitization. While excessive alcohol use can cause fading, it's an inexpensive sanitizing option effective for killing bacteria, especially in professional settings. Use a dry cloth to apply alcohol after each cleaning session.
- Keep alcohol wipes in your bathroom for easy access. Use one to wipe down your roller after cleaning, and follow up with a dry cloth.
- For casual use, occasional alcohol application suffices.
Sanitize your roller by boiling it in water for 30 minutes to thoroughly remove bacteria. Boiling water effectively kills bacteria that may resist other cleaning methods. Heat a pot of water on your stove, ensuring the stone can fully submerge. Once boiling, use tongs to place your roller in the water. After 30 minutes, remove the roller with the tongs.
- Always use oven mitts when handling hot items.
- Add 1 to 2 tbsp (17-34 g) of salt to the water to prevent sharp temperature fluctuations.
- Some suppliers advise against immersing jade in water to preserve its Qi.
Drying Your Roller
Use a dry cloth to wipe off excess soap from the jade piece. After gently cleaning, remove any remaining soap residue to prevent clogging of the roller's pores, ensuring optimal cleaning.
- Soft vegan cloths are recommended.
Allow the roller to air dry by placing it on a soft towel. Lay a clean, soft towel on a flat surface to provide a drying spot for your roller. Ensure the room is well-ventilated with dry air to prevent rusting of the roller's metal parts. Avoid humid environments, such as steamy bathrooms, and consider storing the roller in a plastic bag in the fridge for added depuffing benefits.
- Dehumidifiers are beneficial in excessively humid locations.
Use your oven to gently heat your jade roller for thorough drying. Place the roller in an oven-safe container and heat it at a temperature between 105 to 110 °F (41 to 43 °C) for approximately 5 minutes or until all signs of moisture disappear.
- Monitor the roller closely and remove it once moisture is no longer visible on its surface.
- Avoid over-drying to prevent damage from the removal of natural water content.
Helpful Tips
- Regularly sanitize your jade roller to prevent bacteria buildup due to its porous nature.
- Consistent sanitization is essential to prevent the reproduction of bacteria and oils from your skin.
- Ensure your jade roller hasn't been treated with any substances that may damage its appearance over time.
Essential Supplies
- Large bowl
- Dish soap
- Ammonia
- Alcohol
- Soft towel
- Clean dry cloth
- Soft, absorbent cloth
- Medium-sized cooking pot
- Tongs
- Oven mitts
