Buzz
Summer is the time when electricity consumption in every household increases significantly. The refrigerator is one of the appliances that consumes a lot of energy because it is often used continuously day and night throughout the year. By using the refrigerator properly, you can save energy consumption and extend its lifespan. In the following article, Mytour will share some ways to save energy consumption from the refrigerator in the summer!
Place the refrigerator in a cool, ventilated area and avoid heat sources
You should place the refrigerator at least 10cm away from the wall to ensure ventilation. To allow air to circulate around the refrigerator and prevent moisture, you can raise the refrigerator off the ground by more than 5cm.
Avoid placing your refrigerator near heat sources such as stoves or ovens, or in direct sunlight. The heat from the sun will cause the refrigerator to work harder to cool down, resulting in increased electricity bills.
Keep your refrigerator away from heat sources such as stoves or ovens
Set the temperature wisely
The optimal temperature for the freezer compartment is -18ºC and for the refrigerator compartment is 5ºC. Users should use a thermometer to check the temperature inside the refrigerator, as according to temperature rules, every 1-degree decrease in cooling equals a 6% increase in electricity consumption. Therefore, adjust the cooling level appropriately to save energy!
Limit unnecessary turning on/off or opening of the refrigerator door
You should minimize frequent opening and prolonged opening of the refrigerator door. When the refrigerator door is opened, cold air escapes and warm air from outside infiltrates inside, raising the temperature. Consequently, the cooling system has to work harder to compensate for the lost heat, leading to increased electricity consumption and reduced refrigerator lifespan.
Store food properly to save electricity
To save electricity with your refrigerator, avoid overloading it with too much food and ensure proper organization with compartments and ventilation gaps to facilitate cold air circulation, thus reducing energy consumption. Allow food to cool before placing it in the refrigerator, as adding warm food requires the refrigerator to not only cool the food but also work extra to offset the heat emitted from the food.
Avoid overfilling the refrigerator with food to save energy
Regularly clean your refrigerator
You should clean your refrigerator every 1-2 months to prevent the growth of bacteria and mold. Wipe the rubber edges of the refrigerator door carefully to maintain durability, sealing, and prevent excessive loss of cold air, ensuring stable operation and better energy efficiency.
On the other hand, you should check the refrigerant gas level annually. If there's a shortage, you need to replenish it promptly to prevent energy wastage and prolong the lifespan of the refrigerator.
It's necessary to regularly clean your refrigerator every 1-2 months
Other tips for using the refrigerator to save electricity
- Use glass or ceramic dishes as they help balance the temperature inside the refrigerator better than plastic containers. Remember to cover the container before storing it in the refrigerator to prevent water condensation.
- Do not allow frost to accumulate on the evaporator coil (in frost-free refrigerators) more than 5mm thick.
- When placing cold water bottles, you can wrap them with a wet cloth. This way, the water bottles will chill faster without consuming much electricity.
Choose energy-efficient refrigerators
Currently, all refrigerator models utilize energy-saving inverter technology. With inverter technology, refrigerators ensure smooth operation, durability, and efficient electricity saving over time, sparing you from worries about electricity bills or repair costs.
Above are some ways to save electricity consumption from refrigerators in the upcoming summer that Mytour Supermarket shares. We hope this article provides you with useful information to use your refrigerator correctly for optimal efficiency and energy savings!
