How to Tune Nanomax Speakers for Perfect Karaoke Singing

Nanomax speakers are gaining immense popularity among users. However, many are unaware of how to tune them for optimal performance. In this article, let's explore the quickest way to tune Nanomax speakers with Mytour.  

Guide to Fine-Tuning Nanomax Speakers

Step 1: Reset the control panel of your Nanomax speakers. Set all control knobs back to zero to ensure precise sound adjustments.

Step 2: Adjust the volume 

Adjust mic volume on Nanomax speakers (turn to 9 o'clock position)

Adjust bass volume for mic on Nanomax speakers (oscillate between 50% - 60%)

Adjust echo volume for mic on Nanomax speakers according to reverberation (4/5 main sound echoes)

Adjust repeat volume for mic on Nanomax speakers (reasonable loop)

Step 1: Plug the microphone into the amplifier, adjust all knobs to the middle. Also, turn the Vol knob on the Micro row to the 11 o'clock-1 o'clock position.

• Speak into the microphone until it's just audible, adjust Lo by speaking numbers '1', '4', '7' into the mic. Typically, the Lo knob is adjusted to the 11 o'clock-12 o'clock position. 
• Adjust Hi using sounds '6', '9' to balance the high (treble) sound of the microphone. Perform adjustments clockwise. Typically, the Hi knob will be at the 10 o'clock position.
• Adjust mid sound (MID knob) by speaking numbers '2', '3', '5', '8' into the microphone. Ideally, you should feel that sounds '2' and '8' are not too dull, and sound '3' is not distorted. Typically, the MID knob will be at the 12 o'clock-1 o'clock position.

Step 2: Adjust echo from singing voice.

• Adjust Lo knob on the ECHO row to the 10 o'clock position, Hi knob to the 11 o'clock-12 o'clock position.
• Set RPT knob to the 12 o'clock position with a repeat frequency of about 6 times. If you have a good singing voice, set RPT to the 11 o'clock position.
• Adjust DLY knob to the 12 o'clock position, if you feel the singing is slower than the music, increase it to the 12:30 or 1 o'clock position.

Step 3: Adjust background music with lower volume than the microphone to ensure clearer sound when singing. 

• HI Knob: Adjust towards 11 o'clock.
• LOW Knob: Adjust towards about 10 o'clock-11 o'clock.
• MID Knob: Adjust towards about 10 o'clock-11 o'clock.

Step 4: Perform adjustments on the knobs on the Master Channel row. The Lo, Hi, MID knobs on this row help adjust the tone of the microphone. 

Notes on adjusting Nanomax speakers 

• Increase the Hi knob on the Micro, ECHO row to make the voice more resonant and melodious.
• Slightly increase the Echo knob on the Micro row and the Low knob on the Echo row to make the voice deeper and more melodious.
• When adjusting the knobs, gently turn them to accurately perceive the sound.
• You should reduce the Vol knob or Mic knob on the Micro row to avoid feedback or humming.

Above are the details on how to adjust Nanomax speakers quickly and effectively. Hope you will succeed in achieving the most relaxing time. Follow Mytour for more useful information!