Buzz
A comprehensive guide to mounting jerseys using rods, hangers, and frames
From basketball to baseball, and football to hockey, jerseys serve as a fundamental symbol of competitive sports. Whether you're expressing loyalty to a beloved team or showcasing your own jersey number, displaying a jersey can imbue any space with warmth and fond memories. Utilizing a shadowbox, curtain rod, or a simple hanger, you can craft an elegant display that proudly exhibits your uniform with flair.
Essential Considerations
- Thread the jersey onto a PVC pipe or curtain rod slightly longer than its width. Mark the rod's ends on the wall, screw hooks at these points, and hang the rod securely.
- Determine the desired placement for the jersey, and either screw in a hook or use a command strip. Hang the jersey on the hook using a wooden or felt hanger.
- Affix the jersey to the backing board of a shadow box using double-sided fabric tape or dressmaker pins. Install a nail in the wall and hang the framed jersey securely.
Step-by-Step Instructions
Mounting on a Rod
Acquire a slim curtain rod or PVC pipe. Curtain rods offer flexibility in adjustment, while pipes provide a sleek and uniform appearance on the wall. Seek out rods painted in your team's colors for added aesthetic appeal.
Determine the width of your jersey from sleeve to sleeve. Grasp the jersey by its sleeves and stretch them out firmly, establishing a straight line from the tip of one sleeve, across the neck hole, to the tip of the other sleeve. Utilize a ruler to precisely measure the length of this line.
Ensure your rod extends slightly beyond the jersey's width. If utilizing a curtain rod, adjust its segments to surpass the jersey's length marginally. For PVC pipes, utilize a plastic pipe cutter to achieve the desired length. The rod should protrude slightly past the jersey's edges to facilitate hanging without causing damage.
Mark the endpoints of your rod on the wall. Employ a pencil to mark the location where the center of the jersey's neckline will rest. Next, halve the length of your rod and measure this distance from the left and right of the center point, marking each end. Confirm the alignment of these points using a ruler and level.
- To ensure proper alignment of your marks, position the ruler against the wall so that it intersects with both points. Then, use a level to verify the ruler's straightness.
Secure hooks at the designated points. If your curtain rod included specific hanging hardware, adhere to the provided instructions for mounting them onto the wall. Alternatively, for PVC pipes or rods without hardware, affix a nail hook, screw hook, or sturdy command strip. Ensure the hooks possess adequate size and strength to support the rod's weight securely.
Thread your rod through the jersey and hang it up. Insert one end of the rod through a sleeve of the jersey and pass it through to the opposite side. Use small tape strips or Glue Dots, if needed, to prevent the shirt from shifting. Position the rod's ends onto your hooks or hanging hardware.
Utilizing a Hanger
Select a felt or wooden hanger. While wire hangers suffice for everyday attire, they may cause indentations in your jersey over time. Opt instead for a sturdy, smooth wooden or felt hanger to display your jersey on the wall. Choose hues that complement the jersey or align with the team's colors.
Identify the desired hanging location for your jersey.
Locate a suitable spot on the wall for hanging your jersey and mark a small pencil dot where the hanger's hook will be positioned. Ensure the chosen area allows the jersey to hang freely without contacting the floor or furniture. To preserve the shirt's quality, avoid placing it near windows or in areas prone to moisture or humidity.
Position a small hook or command strip on the wall. Ensure the area above your marked spot is clean and free of any debris. For walls suitable for alterations, insert a small nail or hook into the plaster. For walls that cannot be modified, affix a command strip to the surface, ensuring the hook aligns with the pencil mark.
Hang up your jersey. Insert the hanger into your jersey and place it onto the nail or hook. For added flair, consider hanging a photograph of yourself in uniform, your favorite player, or a piece of sports equipment nearby.
- If your jersey tends to slip, use small Glue Dots or similar adhesives to keep the fabric in position.
Displaying Your Jersey in a Frame
Invest in a spacious shadow box display case. Opt for a shallow shadow box or similar container, ensuring it possesses adequate depth to accommodate your shirt and any accompanying items you wish to frame alongside it. Look for border hues that complement the jersey or match the room's decor.
- Opt for a square shadow box if you intend to fold the shirt to highlight just the number.
- Choose a tall, rectangular shadow box for showcasing the entire jersey.
Detach the backing board from the shadow box. Commercially available shadow boxes typically come equipped with a backing board, often crafted from cork or thin wood. Remove it as you would with the backing of a picture frame, and lay it flat on a surface.
- To enhance the appearance of the backing board, consider covering it with fabric or paper that complements or contrasts with the jersey's colors.
Secure your shirt to the board using double-sided fabric tape. Whether folding it neatly or displaying it in its entirety, employ the same basic technique to fasten your jersey. Utilize strips of double-sided fabric tape to affix the shirt securely to the board. Apply firm pressure to ensure a snug fit.
Utilize dressmaker pins to anchor loose fabric. Insert small dressmaker pins through the jersey to secure any loose fabric in place. Target areas that will remain concealed, such as within the sleeves and shoulders. Conceal exposed pinpoints with fabric tape.
Add additional embellishments to the board as desired. If space permits, consider incorporating complementary elements into the shadow box. Lightweight objects can be affixed similarly to the jersey itself. For bulkier items, explore attachment options such as Velcro straps or twine. Alternatively, some items may be propped against the base of the shadow box.
- For personal jerseys, consider including equipment used during gameplay, such as gloves, balls, or pucks.
- For fan jerseys, contemplate incorporating team memorabilia like flags or player collectibles such as trading cards.
Mount a nail or hook onto the wall. Examine the rear side of your backing board to identify the type of mounting mechanism it utilizes. Typically, this will be a standard nail mount. For walls suitable for modification, select your desired hanging location and install a nail or the appropriate mounting device. In instances where wall alteration isn't feasible, opt for a command strip instead.
- For heavier shadow boxes, ensure the nail or hook employed is robust enough to support the frame's weight.
Reattach the backing board and hang your jersey display. Once your arrangement is finalized, reposition the backing board onto your shadow box. Exercise caution to avoid disturbing or displacing the contents within. Subsequently, hang the frame in place and relish in your newly adorned space.
Handy Tips
-
If you're comfortable with piercing your jersey, you can mount it on the wall using two simple thumbtacks.
Essential Supplies
Mounting on a Rod
- Jersey
- Curtain rod or PVC pipe
- Plastic pipe cutter
- Nails or command strips
- Metal ruler
- Pencil
- Glue Dots or tape (optional)
Utilizing a Hanger
- Jersey
- Wooden or felt hanger
- Nail or command strip
- Pencil
- Glue Dots or tape (optional)
Displaying Your Jersey in a Frame
- Jersey
- Shadow box
- Double-sided fabric tape
- Dressmaker pins
- Nail or command strip
- Tape or glue
- Additional decorations (optional)
