Buzz
JumpStar and Dumpper are two separate software but are created to work together perfectly. Using the wifi password discovery software JumpStar and Dumpper will make it easier to view Wifi passwords around you without having to ask for the password.
How to use JumpStar and Dumpper for Wifi Password Discovery
As you know, securing your Wifi is crucial, and users don't need to change Wifi passwords frequently. Unless too many people know your password, you only need to change your Wifi password on your device when necessary. However, when using Wifi password discovery with JumpStar and Dumpper, your perspective will change compared to the results that the software provides.
Guide on using JumpStar and Dumpper for wifi password discovery on your computer
Preparation:
- Download the JumpStar software here.
- Download the Dumpper software here
- Note
- - Using Wifi password discovery with JumpStar and Dumpper does not guarantee a 100% success rate in finding passwords, especially for advanced modern modems.
- During use, there is a possibility of a blue screen on your computer; no worries, you can simply restart it.
- The software works best on Windows 7, with limitations on Windows 10 Creators Update and Windows 10 Fall Creators Update.
Step 1: After downloading the two software JumpStar and Dumpper, remember to extract them and proceed to install the JumpStar software first. The installation interface appears; you choose the language you want to use and then press Next.
Step 2: Continue pressing Next in the next step.
Step 3: At this point, the application asks you to agree to the terms of the software and then select Next to continue.
Step 4: After that, click Finish when the installation is complete.
Step 5: After installing JumpStar, we open Dumpper that we just extracted earlier; here, we will discover Wifi passwords with JumpStar and Dumpper.
Step 6: Before proceeding with Wifi password discovery using JumpStar and Dumpper, switch Dumpper's language to Vietnamese by selecting Languages => Choose Vietnam.
Step 7: Then go to the WPS section and perform a Scan of the Wifi networks available in that Modem.
Step 8: Choose any Wifi, here it's Mytour, and then click on JumpStart.
Note: Remember the PIN code for later entry.
Step 9: Then the JumpStar software appears, just press Next.
Step 10: Enter the PIN of that Modem and then select Next.
Step 11: Choose the Wifi corresponding to the previously entered Pin and then press Next.
Finally, you just need to let JumpStar search for Wifi.
The process of discovering Wifi passwords with JumpStar and Dumpper will take a while, and you need to be patient.
This step may cause your computer to have a blue screen, so be sure to restart if you encounter this error. After the discovery is complete, you can connect to that Wifi, and the password will be saved in the profile section of the Dumpper software.
Mytour has guided you on how to discover Wifi passwords with JumpStar and Dumpper, using the JumpStar and Dumpper software to find Wifi on your computer, laptop, although not entirely successful, it's still an option worth trying.
