Buzz
Casper is one of the renowned brands from the land of the Golden Pagoda, widely used across Southeast Asia. In Vietnam, this product is also trusted by Vietnamese consumers. Surely, when buying the Casper GH-18IS33 air conditioner, especially online, you want to know how to install it correctly. Let's explore the article below to understand more about installing this Casper GH-18IS33 air conditioner!
1. Installation Position of Casper GH-18IS33 Air Conditioner
The installation position is one of the crucial factors determining the efficiency of using the Casper Inverter GH-18IS33 air conditioner. The Casper GH-18IS33 Inverter air conditioner consists of an outdoor unit and an indoor unit, each with different operating principles, so each unit also has different installation methods. Specifically:
- About the outdoor unit of Casper GH-18IS33 air conditioner: Installed outdoors, you should choose a secure, ventilated, clean location, avoiding direct sunlight exposure. Shaded areas with roof cover are preferable.
- About the indoor unit of Casper GH-18IS33 air conditioner: Installed inside your room, you can choose a space equivalent to the capacity of the Casper GH-18IS33 Inverter air conditioner you purchased. Typically, the indoor unit is installed centrally in the room so that the cooling system can evenly distribute air throughout your space. Additionally, prepare some items such as electrical wires, copper pipes, and drainage pipes from the indoor unit to the outside.
2. Installing the Casper GH-18IS33 Air Conditioner
To save costs, many families often order online and then try to install it themselves. If that's the case for you, here is the installation process for the Casper GH-18IS33 air conditioner, provided by the price comparison portal Mytour.vn!
2.1 Installation process of the indoor unit
First, remove the bracket behind the indoor unit and adjust the position to ensure balance when installing. Secure the indoor unit bracket with screws and drill holes for the copper pipes to exit. Note to leave a distance of about 5cm between the indoor unit and the ceiling, so that hot air can dissipate into the ceiling without being blown back towards the unit.
Next, connect the electrical wires, install the drainage pipes, copper pipes, and wrap insulation for the 3 indoor unit pipes. Congratulations! You have successfully installed the Casper GH-18IS33 2-way air conditioner.
2.3 Procedure for Installing the Outdoor Unit
The outdoor unit of the Casper GH-18IS33 2-way air conditioner is always installed lower than the indoor unit. This setup helps save repair costs and extends the lifespan of the machine. Additionally, using rubber pads under the unit's feet reduces shaking, strong vibrations, and surrounding noise.
2.3 Connecting the Refrigerant Pipes between the Outdoor and Indoor Units
First, measure the length of the copper pipe connecting the two units, then cut the pipe. Thread insulation, electrical wires, and wrap tightly with tape. Finally, connect the power supply and test the machine. Check for any issues and ensure normal operation.
3. Considerations when Installing the 12000BTU Casper GH-18IS33 Air Conditioner
If you live in an apartment, install the outdoor unit of the 18000BTU Casper GH-18IS33 air conditioner away from neighboring doors to avoid noise disturbance. Also, place it away from your resting area to prevent thermal shock and ensure the safety of your family.
Here is the procedure for installing the Casper Inverter 18000 BTU 2-way GH-18IS33 air conditioner with R-32 gas. We hope this information helps you better understand how to install this Casper GH-18IS33 2-way air conditioner!
