Buzz
With the advancement of security algorithms, using fingerprint sensors to lock and unlock phones is becoming increasingly common. Most iPhones nowadays come with this feature integrated since the iPhone 5S, allowing users to set up iPhone fingerprint locks and use them instead of traditional passcode unlock. However, not everyone is familiar with this feature, especially when their device contains a lot of important data. Hence, the following article shares simple and quick steps to set up iPhone fingerprint locks.
GUIDE TO TURN ON AND SET UP IPHONE FINGERPRINT LOCK
1. Set up Passcode (Skip this step if you already have one)
Step 1: From the home screen, navigate to the Settings app > Touch ID & Passcode
Step 2: Here, click on Turn Passcode to set a password for your device or choose Passcode Options to customize your password.
2. Enable iPhone Fingerprint Lock
Step 1: After setting up the Passcode lock, still in the Touch ID & Passcode interface, tap on Add a Fingerprint to begin enabling fingerprint unlock on your iPhone.
Step 2: Now, the device will prompt you to place your finger on the physical Home button to scan your fingerprint. Choose the finger you want to use to enable iPhone fingerprint lock, you can comfortably use any finger while holding the device with one hand and scanning with the other. You can save multiple fingerprints, even those of family and friends if desired.
Step 3: Place your finger on the Home button with moderate force, avoid pressing too hard or the operation will be canceled. When the device vibrates, lift your finger gently off the Home button and lightly touch it again. Repeat lifting and placing your finger multiple times for the device to scan and capture your fingerprint from all angles. The more complete the fingerprint scan, the higher the accuracy in each use. The red lines on the screen indicate the progress of the fingerprint image capture. Press Continue to proceed to the next step.
Step 4: When the fingerprint image on the screen is filled with red lines, indicating that the scanning process is nearly complete. At this point, you need to scan the remaining edges of the fingerprint with the same action as before. Users should place their fingers flexibly so that the iPhone can scan the edges of the fingerprint. Press Continue when finished to end the process.
After completing the first finger, you can proceed to tap on Add a Fingerprint to add fingerprints of other fingers in case the primary finger is injured or scratched, preventing unlocking with iPhone fingerprint. Additionally, readers can toggle the iTunes & App Store switch to combine purchasing apps from the Store without entering the Apple ID password. Confirm the Apple ID password to set up this feature.
https://Mytour.vn/khoa-van-tay-iphone-cai-khoa-van-tay-iphone-dat-khoa-van-tay-iphone-3535n.aspx
Here, Mytour.vn has provided detailed instructions on setting up iPhone fingerprint locks, hoping users can easily enable this feature on their devices. Additionally, an old but widely known feature is setting a passcode password for the device. Instead of a 4-digit passcode, you can set up a 6-digit iPhone password for better security, making it harder to break, infiltrate device data... In this article, Mytour uses an iPhone 6 to demonstrate the trick steps, but for other devices like iPhone X, iPhone 8, 8Plus, 7, 7 plus, 6s, 6s plus, 6 plus, 5s, you can perform similar steps. Furthermore, if you encounter Touch ID errors, refer to the Touch ID troubleshooting methods that Mytour.vn has previously provided. Wishing you success.
