Buzz
During usage, LG washing machines often encounter perplexing error codes, leading to machine inactivity and affecting consumers' laundry needs. In today's article, we share LG washing machine error code chart and how to quickly resolve these issues. Follow along with us to delve into the details through the article below.
Causes
- Loss of water or blocked water supply
- Inadequate water pressure to supply water to the washing machine
- Clogged or partially closed water supply valve
Troubleshooting
- Check if the water source is still operational.
- If water pressure is insufficient, consider using an automatic pressure booster pump.
- Inspect the water faucet for any obstruction by foreign objects.
- Use an additional pressure booster pump when water pressure is too weak.
0E Error Code – Water Unable to Drain from the Washing Drum
Causes
- The drainage hose is obstructed by foreign objects or dirt.
- The drainage hose is positioned higher than the manufacturer's specified level.
- The drainage pipe is twisted or blocked at some point.
Troubleshooting
- Check the water filters and clean the filter heads from dirt buildup.
- Place the outlet of the drainage hose down to the ground.
- Inspect if the drainage pipe is clogged or twisted at any point.
UE Error Code – Washer Unable to Spin
Causes
- The washer is positioned on an unbalanced surface, causing it to be uneven relative to the floor.
- Uneven distribution of clothes in the washing drum.
Troubleshooting
- If the washer is unbalanced, readjust it to be level on the floor.
- If uneven clothes distribution is the issue, pause the wash cycle, open the lid, rearrange the clothes evenly, close the lid, and restart the machine for normal operation.
- Distribute clothes evenly in the washing drum when the UE error is displayed.
DE Error Code – Washer Lid Not Fully Closed
Causes
- The machine lid is not securely closed.
- There is something trapped preventing the lid from closing tightly.
Troubleshooting
- Unplug the power cord.
- Check if anything is obstructing or jamming the lid, then close it firmly to restore normal operation.
FE Error Code – Water Overflow or Leakage
Causes
- Due to a loose connection at the water hose inlet to the washing machine.
- Because the internal sensors of the washing machine are no longer functioning.
Troubleshooting
- Check the water hose inlet for any loose connections.
- If after inspection and handling, this error persists, contact the manufacturer immediately for assistance.
- Check the drainage hose again if there is any water leakage.
PE Error Code – Pressure Switch Fault
- Cause: The pressure switch of the machine is damaged or malfunctioning.
- Troubleshooting: This issue is related to the hardware of the appliance; you should contact the manufacturer promptly for advice and support.
AE Error Code – Inadequate Power Supply Quality
Cause
- This error occurs due to a voltage deviation from the washing machine's working voltage level.
- It may be caused by the voltage sensor operating at an incorrect power rating.
Solution
- Check the electrical power supply for overvoltage or undervoltage.
- If the issue persists, contact technical support immediately.
Hope with the above information, readers will grasp LG washing machine error codes and quickly find solutions. Thank you for following our article.
