Buzz
502 Glue, also known as iron adhesive, has very strong adhesion, sticking to both wood and iron. If 502 glue sticks tightly to your hand or skin, not knowing how to handle it can easily cause swelling and skin peeling, leading to pain. Mytour will suggest tips for you to quickly remove 502 glue from your hands easily and safely.
The liquid solution of 502 glue, when stuck on your skin, will soon form a thin white layer, firmly attached to the skin surface. At this point, you often have the habit of using your thumb to rub against your index finger to remove the glue layer. But that only makes the problem worse, with two fingers sticking tightly together. Apply the following tips to remove 502 glue stuck on your hands:
1. Soap and Nail Polish Remover
Dilute soap with warm water, then soak sticky hands in the solution for about 10 minutes or until the adhesive layer softens. Gently peel off the white adhesive layer from your hands. This method prevents redness unlike traditional peeling.
Nail polish remover gradually removes the white adhesive layer.
Even after washing and drying your hands, you still notice adhesive residue. Pour nail polish remover onto the sticky area, then gently rub; the white adhesive layer will gradually peel off.
Vegetable butter is another alternative.
For those with delicate and sensitive skin, try using shea butter to gently remove adhesive residue. Simply apply and rub on the affected area until the adhesive peels off, then rinse with clean water.
Shea butter effectively softens and quickly loosens 502 glue.
3. Salt
Pour 2 tablespoons of salt into your hand, add a little water to create a paste, then massage onto the adhesive for 30-60 seconds. Repeat until all the adhesive peels away.
.jpg)
Using salt is another way to remove this annoying sticky residue.
4. Sandpaper and machine oil
Use sandpaper or a nail file to rub against the white adhesive residue on your hands. Note that you should not rub too hard as it may cause skin abrasions and damage. Next, take machine oil (or gasoline, kerosene, alcohol) and gently rub it on the sticky part of the skin. Then, rinse thoroughly with water.
You can use a nail file to wear away the adhesive.
5. Wind oil
For non-sensitive skin, apply wind oil directly to the adhesive residue on the skin and gently massage. You can massage in circular motions to evenly distribute the oil onto the adhesive, making it peel off faster.
Wind oil is very effective in removing 502 adhesive residue on hands.
6. Special adhesive remover
If you find yourself stuck with excess 502 glue on your skin, consider purchasing specialized 502 glue remover to effectively eliminate the discomfort and pain caused by the adhesive. You can easily find this remover at construction material stores, glass door outlets, or electronic hardware shops.
When dealing with a large area of 502 glue on your hands, opt for dedicated glue remover for swift removal.
502 glue boasts exceptional bonding capabilities, setting in just a few seconds. Exercise caution during usage, avoiding contact with eyes and keeping it out of reach of children. In case of accidental skin contact, utilize the provided tips to promptly remove the adhesive residue.
