Reasons and Effective Fixes for Electric Kettle Not Heating Properly

- This is a common issue encountered by many users when using electric kettles for extended periods. Prolonged high temperatures can cause the wire to expand, leading to breakage or exposure.

Damaged or Exposed Wiring

- Fix: To remedy this situation, simply replace the damaged wire with a new one, or use specialized tape to securely mend the exposed section of the wire.

- If your electric kettle is used for prolonged periods, continuously placing it on the base will occur daily. This downward pressure inadvertently prevents sufficient contact between the base and kettle body, rendering the kettle unable to function properly.

Malfunction between Base and Kettle Body Contact

- Fix: Firstly, place the base on a flat surface and observe. Then, use a thin piece of metal to gently pry both ends of the metal upwards. Be cautious not to use pliers for this task, as it may risk breaking the metal rod.

- Almost all types of electric kettles are equipped with a 'Max' mark inside the body of the kettle so that users can pour water according to the designated mark. However, if you pour water into the kettle beyond this mark repeatedly for a long time, the device will certainly not function as well as usual, leading to an inability to turn on. 

Pouring Water Beyond the Designated Limit into the Kettle

- Fix: You must strictly adhere to the manufacturer's usage guidelines, avoiding pouring too much or too little water. Doing so will help the electric kettle operate better and maintain longevity. 

- Continuously boiling water multiple times will prevent the electric kettle from having time to rest. This is also the main reason why the heating plate of the device is always overheated. If this continues for several days, it could lead to the heating plate catching fire. 

Boiling Water Continuously Multiple Times

- Fix: When boiling water for the first time, allow the device some time to cool down the heating plate. Then, you can plug it in and boil water again. Breaking up the time for boiling water is also essential to ensure the machine's durability and prevent damage. 

- With prolonged use of the electric kettle, it's difficult to avoid the situation where the metal ends at the base become oxidized. When this issue occurs, electrical sparking will happen, preventing the device from holding electricity and transferring heat efficiently to perform its function. 

Metal Ends at the Base of the Electric Kettle Oxidized

- Fix: If encountering this issue, simply use a screwdriver to gently remove one screw from the base. Then, clean these metal ends with a small piece of metal as well as other areas experiencing similar issues. 

- Accidentally allowing water to seep into the machine feet for a long period will lead to rusting. This causes the electric kettle to malfunction and disrupt its operation.

Internal Machine Feet Soaked with Water

- Fix: When faced with this issue, you'll need to use a small electronic soldering iron to repair it. First, clean the kettle's surface thoroughly. Then proceed to solder a small joint onto the base of the machine. However, be careful to avoid damaging the white plastic piece near the location of the electric kettle's metal ends.

Electric kettles are commonly used for daily activities, so limiting risks and damages during usage is crucial. Here are some helpful tips to enhance your electric kettle experience: 

- Before plugging in, ensure to wipe dry the external surface of the kettle. Avoid leaving the kettle in a wet condition, as it may result in electric shocks, compromising safety. 

- Always pour water up to the designated mark inside the kettle's body. Pouring too little or too much water may lead to various malfunctions in the device. 

- Electric kettles have only one function: boiling water. You should not use the device for purposes such as cooking food. 

Some Tips When Using an Electric Kettle

- It's essential to carefully read the usage instructions and warning notes to use the device effectively. This helps avoid malfunctions and ensures safer usage. 

- Avoid continuously boiling water, as it may cause the heating plate to burn out and damage the electric kettle. 

- Always clean the kettle after use.

Above are the reasons and effective solutions for electric kettles not turning on that you can refer to. Hopefully, through this article, you can easily apply the above solutions successfully. Currently, Mytour Supermarket is selling many models of electric kettles from reputable brands such as Sunhouse, Comet, Toshiba,...