Buzz
A common but often misunderstood issue is when the refrigerator fan fails to run. Explore the causes and solutions with Mytour.
1. Fan Blocked: Potential Culprits
The fan might be obstructed due to various reasons like a faulty circuit board or debris accumulation around the evaporator fan.
>> More Insights: Discover effective remedies for a non-cooling refrigerator.
>> Xem thêm: Vì sao tủ lạnh không lạnh? và cách xử lý hiệu quả
2. Refrigerator Fan Not Running Due to Malfunction
Moreover, fan malfunction is another leading cause of its inactivity. This could be due to:
- Long-term Usage:
Lack of regular cleaning and maintenance leads to dust accumulation, affecting the fan motor.
- Electrical Issues: Damage to the evaporator coil wiring, bearing wear, or fan motor failure.
Here are some effective troubleshooting suggestions:
- Regular Maintenance: Clean your refrigerator monthly to prolong its lifespan and ensure stable fan operation.
- Replace Fan Blades: Seek professional assistance or contact reputable service centers for assistance.
- Check Power Supply: Inspect and replace faulty fan motor power supply if necessary.
3. Malfunctioning Ice Discharge Component
Apart from the mentioned reasons, the malfunctioning of the ice discharge part also causes the fan to stop running. Some reasons why the ice discharge part fails to work are:
- The blockage and inactivity of the fan result in ice buildup in the refrigerator. This leads to thick snow accumulation and the fan blades becoming stuck.
- The refrigerator fails to switch to cooling mode.
Hence, in this situation, you should check the ice discharge part and contact a repair technician promptly for timely rectification.
>>> Read more: Loose Refrigerator Door: Causes and Solutions
4. The door switch is not closing properly.
Lastly, the occurrence of the refrigerator fan not running is due to the door switch not closing properly. This could be because of one of the following reasons:
- Some refrigerator models may only operate the fan when the door is closed. Therefore, if the refrigerator door is not securely closed or is partially open, it may cause the fan to malfunction.
The contact point on the door switch may be damaged and not functioning properly.
Improperly closing the refrigerator door can break the switch or may be due to a manufacturing defect.
The only solution is to pay attention each time you open and close the refrigerator door. Close the refrigerator door tightly and avoid slamming it to prevent damaging the contact point. When the door switch is faulty, you need to replace it to continue using it.
To prevent any malfunctions, especially the fan not running, you need to consider some things after using it:
- - Avoid opening and closing the refrigerator door continuously as it will cause cold air to escape, which not only affects the internal fan but also wastes energy.
- Do not use excessive force when opening and closing the door to avoid damaging the door switch.
- Regularly defrost to prevent ice buildup. When defrosting, allow it to occur naturally, absolutely do not use sharp objects to chip away at the ice.
- Clean the refrigerator regularly, at least once a month. This not only helps keep the refrigerator clean, reducing dust and dirt, but also helps the fan operate effectively.
So here it is, Mytour has shared 4 reasons and solutions when the refrigerator fan doesn't run. Hopefully, through this, you will know how to handle it when your home refrigerator encounters a similar situation. Thank you for following the article!
