When faced with the sudden loss of power on your Android device, endless charging without any response, or frozen apps, it's easy to feel stuck and unsure of what to do. Many cases can be addressed with simple solutions, saving you the hassle of sending your device for repairs. You can employ some handy tips we share below to revive your device.
1. Remove and Reinsert the Battery
This is a simple trick that almost everyone would try. However, it may not always be effective. When you take your device to a repair shop, they do the same thing you do at home, but your device suddenly wakes up. Removing and reinserting the battery is the right approach, but we advise you to leave the battery out for a relatively long period, at least 30 seconds, to ensure that the electrical current in the device is completely cut off and any residual charge is depleted. Then, reinsert the battery and power on the device, waiting for it to boot up.
In some cases, you may need to hold down the power button longer than usual (about 10 seconds), as your device may have completely shut down. So, be patient. You can also try combining the power button with other hardware buttons on your device, such as power + volume, to exit the complete power-off mode. This method will vary depending on the device models, and manufacturers will have their own button combinations. Give it a try; it won't harm your device.
2. Check Power Source and Battery
If you've tried the above steps and your device still won't turn on, you need to check your charging source to see if it's receiving power. It's best to try charging with another device first to ensure there are no issues with the charging source. For high-end smartphone models, letting the battery drain completely can lead to prolonged charging times or even failure to charge despite your device showing the charging indication as normal. Try removing the battery for a while and then reconnecting your charging source. Also, if you have a power source of 1.5A or 2A, there's hope that your battery will charge faster than with the standard 1A charger.
You should also check if your battery shows signs of swelling or bulging, indicating potential damage. Prolonged use and improper charging can quickly deteriorate the battery. After fully charging the battery, hold down the power button for about 10 seconds. If that doesn't work, your device may have a power issue, or you may need a device to jump-start the battery if you can't charge it normally.
3. Restore Factory Settings
Worse yet, your device may have experienced a software malfunction and cannot boot up. You may notice your device booting up and then shutting down again, or it may reach the manufacturer's logo and then shut off, repeating this cycle indefinitely. In this case, you will lose all stored data on your device if you haven't backed it up.
Encountering this scenario adds a bit more complexity; you'll need to put your device into Recovery Mode. Different phone models and manufacturers have different key combinations:
Method 1: Press the volume up + power buttons
Method 2: Press the volume up + volume down + power buttons
Method 3: Press the volume up + Home + power buttons
Method 4: Press the Home + power buttons
Method 5: Press the volume up + camera buttons
If the above methods fail to get you into this mode, seek guidance specific to your device. Manufacturers may intentionally avoid accidental activation by incorporating complex button sequences. If successful, you'll encounter this symbol:
You'll press a certain button on your device to access the Recovery Mode menu. This varies depending on the device, it could be the power button, volume keys, home button, etc. Some devices may directly enter this mode.
In the Recovery Mode interface, use the volume keys to navigate up and down and the power key to select. Here, you'll select Wipe data/factory reset > press power.
Choose YES to erase all data, effectively resetting your device to its manufacturer's default state.
If the above fails, your device will need software intervention. This method is complex and specific instructions will be provided in subsequent articles. To execute Method 3, you should have some knowledge of phones to proceed. Using software that causes additional damage to your device may void manufacturer warranty.
https://Mytour.vn/danh-thuc-android-khoi-dong-147n.aspx
These are basic tricks to revive your Android device when it fails to boot or gets stuck in app freeze. For minor issues, you won't need to spend extra time getting your device repaired; you can troubleshoot them yourself in no time. Wishing you success.
