Buzz
1. Causes of high-speed kettle not receiving electricity
High-speed kettle not receiving electricity may be due to the following reasons:
- Continuous operation of the kettle for prolonged periods.
- Damaged or faulty electrical wires.
- Poor contact between the kettle body and the base.
Rust inside the machine's legs is causing the issue.
Oxidation of the metal head part on the base is another possible reason.
2. Fixing the problem of high-speed kettle not receiving electricity.
The issue may be due to damaged or broken electrical wires.
The reason for the high-speed kettle not receiving electricity may be due to damaged or broken electrical wires. Electrical wires can be damaged by insects or rodents biting or due to prolonged use causing the wires to break, expand, or become damaged, resulting in the kettle not receiving power. Therefore, the electrical conductive base not having electricity makes the kettle inoperable.
Solution: Users should check the kettle's electrical wires. In case you find the electrical wires exposed or broken, wrap them with specialized tape. Or if the wires are too old, users should replace them with new ones.
Poor contact between the base and body
Insufficient contact between the base and body of the high-speed kettle can result in the kettle not receiving electricity. Alternatively, if the metal ends of the base encounter problems, the high-speed kettle may also fail to receive power.
Solution: For this case, users need to carefully observe and then gently lift the metal ends of the base with a metal tool. Avoid using pliers to pull these ends as it may cause them to break.
Excessive water in the kettle
Having too much water in the kettle beyond the recommended level will prevent the high-speed kettle from receiving electricity.
Solution: Firstly, users should check if the water level in the kettle is appropriate. If the water is too full, pour some out until it's equal to or less than the designated amount. For subsequent boiling sessions, users should boil the water to the appropriate level to ensure the kettle operates normally.
Continuous operation of the kettle
Continuous operation of the high-speed kettle for prolonged periods without breaks will result in it not receiving electricity. This usage pattern will cause the heating plate to generate excessive heat, disrupting the kettle's operation, and potentially causing the heating plate to burn out.
Solution: After boiling water, users should allow the kettle to rest to let the heating plate cool down before continuing to boil.
Due to rust inside the machine's legs
The legs of the high-speed kettle absorb water over time, leading to rust that makes electrical transmission more challenging.
Solution: You can repair the machine legs using small-sized electronic soldering. Ensure to carefully clean the kettle surface before soldering. Also, during the assembly of the high-speed kettle, make sure not to lose the white plastic piece near the ends of the two metal parts.
Solution: Repair the kettle's legs using small-sized electronic soldering. Ensure thorough cleaning of the kettle surface before soldering. Additionally, during the assembly of the high-speed kettle, take care not to lose the white plastic piece near the ends of the two metal parts.
Here are the causes and remedies for the high-speed kettle not receiving electricity that you need to know. Save it for reference and application. For any inquiries about the product or to place an order, visit our Mytour supermarket system directly or contact the hotline: 1900 6788 for the best support and advice.
Check out some models of high-speed kettles currently available at Mytour
