Buzz
1. Discovering the Outstanding Features of Atmor At-30eht Indirect Water Heater
The Atmor At-30eht indirect water heater is favored by users because of the following features:
1.1. Safety with ELCB Shock Protection System
The tank equipped with an ELCB shock protection system ensures utmost safety for users. Upon detecting any electrical leakage, the tank immediately shuts off to prevent fire hazards, minimizing electrical accidents during usage.
1.2. Excellent Heat Retention with Thick Insulation Layer
The Atmor At-30eht hot and cold water tank features a thick 20mm insulation layer that effectively retains heat. The Polyurethane insulation layer minimizes heat radiation loss and keeps the water hot for several hours.
1.3. Glass-lined Enamel Coating Technology
The Atmor At-30eht hot and cold water tank employs advanced, modern glass-lined enamel coating technology following European standards. The Blue Diamond coating inside the tank prevents cracks when the tank expands and contracts with temperature changes. Additionally, it resists corrosion and ensures cleaner water.
1.4. Equipped with a 5-Feature Protection System
The standout feature of the Atmor At-30eht indirect hot and cold water tank is its 5-feature safety protection system. This includes protection against overheating, overpressure, electrical and water isolation, safe grounding, and a non-return valve to prevent water backflow. It also includes automatic control features such as cold water supply, hot water heating, and automatic temperature maintenance.
2. Proper Usage Guide for Atmor At-30eht Indirect Water Heater
To ensure stable operation and high durability of the Atmor 30-liter At-30eht hot and cold water tank, users can refer to the following usage steps:
Step 1: Open the Water Valve Lock
After successfully installing the machine, start by opening the water valve lock. Move the faucet lever to the hot water position and wait for 5 to 10 minutes for the water to flow automatically. Check for any water pipe leaks, and if found, call a technician for immediate repair.
Step 2: Check the ELCB Shock Protection System
If there are no water leaks, proceed to check the ELCB shock protection device. To do this smoothly, ensure that the circuit breaker is turned on. Press the gray button on the ELCB device; if the red light on the device turns off, it is functioning properly, and proceed to the next step.
Step 3: Set the Machine to Normal Mode and Adjust the Desired Temperature
To set the machine to normal mode, press the reset button to establish the initial settings. During use, adjust the desired temperature by turning the adjustment knob on the machine body. A useful tip to save energy is to adjust the temperature to the E position. When the water reaches the set temperature, the LED light will turn green to indicate readiness for use.
3. Some Notes on Using the Atmor At-30eht Indirect Water Heater
- Do not let the machine run all day as it reduces the machine's lifespan and consumes excessive electricity.
- Do not customize the water temperature too high as it can pose a danger to family members.
- Regularly inspect the equipment and perform cleaning and maintenance to increase the machine's durability.
Above are the details about the Atmor At-30eht indirect water heater as well as the safe and proper usage guidelines. If you find it helpful, don't forget to save it for immediate application!
