Setting Up and Viewing Cameras with 2cu IP Camera

By installing and viewing cameras on 2cu IP Camera, you can monitor and supervise images at camera locations whenever you want directly from your smartphone. Details on how to set up will be shared specifically by Mytour.vn in the article below.

To conveniently manage camera devices at home, in workplaces like offices, and factories, mobile surveillance software on your phone will assist you in this task. And none other than 2cu IP Camera will be your effective tool to manage images quickly and conveniently.

Guidelines for Connecting 2cu IP Camera with Phone

Setting Up and Viewing Cameras with 2cu IP Camera

Step 1: Plug in power for the camera

Step 2: Connect the port behind the camera to the network port of the Modem device in use

Step 3: From your phone's browser, access the link below to download the 2cu app

Installation Process:

Click the arrow button on the webpage you just navigated to --> Tap Accept to directly download the app from the App Store

Step 4: Launch the app, tap Deny or Allow to receive notifications from the app during usage.

Step 5: Proceed with account registration

On the main interface, select the Register function --> Choose Register by email

Proceed to enter your email address --> Enter password --> Confirm password --> Press Next to register. Upon successful account creation, a series of ID will be displayed on the screen, press OK to proceed

This ID series will be used for account login --> Enter password and select Login to access.

Step 6: On the main interface of the 2cu IP Camera viewing app, select the plus icon --> Navigate to Manual

Enter your camera's ID (found on the device sticker) --> Press Next --> Enter your camera's password (Default pass is 123, if you've changed it, enter the updated password) --> Select Save to access

After completing the setup and installation steps above, you can now observe images at the camera locations.

For convenience in usage and swift image transmission, connect your Camera to Wifi. Here are the detailed steps:

Step 1: Plug in power to the camera --> Connect the Camera's network port to the Modem

Step 2: Open the 2cu IP Camera software on your phone --> Select the connected Camera --> Choose Setting --> Navigate to Network Settings

Step 3: Tick the WiFi box --> Enter the password for connection. Wait a few seconds for the camera to receive the network, and when successfully connected, the camera light will turn on. At this point, you can move the camera device to any location in the house while your phone can monitor at any time.

https://Mytour.vn/cach-cai-va-xem-cam-tren-2cu-ip-camera-27280n.aspx
These are basic yet detailed instructions for installing and viewing cameras on 2cu IP Camera, enabling you to monitor every image, every location from where the cameras are installed. Wishing you success in following these steps.